Showerbuddy P1, P2 Owner's Manual
Owners Manual
ShowerBuddy
P1 & P2 Pediatric Kit
INTENDED USAGE:
The Showerbuddy shower/commode chair is a medical device indicated for use by persons with limited
mobility who are unable to stand, walk and/or seat independently. The device is specifically designed for
individuals who require additional support and stability during washing, toileting and other hygienic
activities. It is a class 1 medical device, which is intended to be used only as a seating option for toilet
issues, showering and bathing. Its purpose is to help physically handicapped people during their hygienic
activities. Any other use is prohibited.
INDICATIONS:
The device is specifically indicated for individuals who (because of the wide variety of possible health
problems) are unable to stand and /or walk and so they need an assistance device to maintain some or all
daily hygienic tasks.
CONTRADICTIONS:
This type of device must not be used by a disabled person alone. The user should always be accompanied
by a caregiver or assistance person. The device is not recommended for persons with flaccid paralysis or
other diseases that cause serious body control problems. Such persons require special wheelchairs
designed for extra stability and support of the user’s body. The need for this type of specialty wheelchair
should be always estimated and indicated by a physician or a physical therapist.
WARNING – Included in this packaging and fitted to the Showerbuddy chair are small parts, plastic wrap
and polystyrene packing that could be dangerous to children under 5.
Keep children away from this device and do not let them play with any parts.
Contents Page
P1 & P2 Parts
Pediatric Kit Assembly
Operation Pediatric Kit
Cleaning and Maintenance
Safety Instructions
Warranty Information
This Shower Chair conversion kit is a Class 1 Medical Device designed to
support people with disabilities or users with reduced mobility during toileting
and showering.
3
4
6
9
10
13
P1 & P2 Pediatric Conversion Kit
2
Exploded Parts
500-271
500-166-R
-264
500-117
38
P1 & P2 kit
142
500-481
500-480
P2 Handle frame
500-117
500-481
plastic
500-264
P1 Seat Pad
500-166-R
38
500-271
500-117
Arm lactch
Arm lock
500-480
collar
P1 Handle frame
3 P1 & P2 Pediatric Conversion Kit
Pediatric Kit Assembly
Both P1 and P2 kits are assembled in the
same way. A note will explain at each stage
where P1 & P2 options exist.
Step 1
Start by removing your handle, seat
cushion and arms as shown in the
illustration.
If needed you should refer to your
chairs user manual, if you don’t have
this you can find it on our website.
Note: If fitting to SB2T or SB3T you will
need to disconnect the tilt release
handle (part #75) from the chair push
handle. Refer to your chair user manual
P1
P2
P1 & P2 Pediatric Conversion Kit 4
Step 2
Arm fitting is the reverse of step 1
using your newly supplied pediatric
arm assemblies.
If you are fitting the P1 kit, refer to the
top image, showing the arms being
inserted from the inside
If you are fitting the P2 kit, refer to the
bottom image showing the arms being
inserted from the outside.
P1
P2
Step 3
Fit your new seat cushion (part
#500-166-R for P1 and part #500-167
for P2) as shown.
Your new seat cushion is a direct
replacement of your existing shower
chair and will fit in the existing holes in
the seat base plate.
Note: If fitting to SB2T or SB3T you will
need to reconnect the tilt release
handle (part #75) back using the holes
provided on the handle of your
pediatric kit.
Step 4
Once all the elements of the kit have
been fitted, check to make sure
everything is fitted correctly, tightened
up and that the arms can fold freely
back and forward.
5 P1 & P2 Pediatric Conversion Kit
Loading...