Show Atelier DIAPro LED Battery Wash Beam IP65 User Manual

1

USER MANUAL

DIAPro LED Battery Wash Beam IP65

2

1.BEFORE YOU BEGIN

What is included

ò1 x Fixture
ò1 x Power cable with plug
ò1 x User Manual

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton; check the
contents to ensure that all parts are present, and have been received in good
condition. Notify the shipper immediately and retain packing material for
inspection if any parts appear damaged from shipping or the carton itself shows
signs of mishandling. Save the carton and all packing materials. In the event that
a fixture must be returned to the factory, it is important that the fixture be returned
in the original factory box and packing.

AC POWER

This fixture has an auto-switching switch-mode power supply that can
accommodate a wide range of input voltages. The only thing necessary to do
before powering on the unit is to make sure the line voltage you are applying is
within the range of accepted voltages. This fixture will accommodate between
100V and 240V AC 50-60 Hz. Each light is connected end to end by the power
socket “POWER IN” and “POWER OUT” on the light, or use the waterproof power
cord. Please ensure the head and the tail tightening when connect the lights, to
prevent the power leakage occurred by water seepage to the plug.

Help preserve the environment! Ensure that this product is
recycled at the end of its life. Your supplier can give details

of local arrangements for the disposal of products.

3

Safety Instructions

!

WARNING!

Please read these instructions carefully, which includes

important information about the installation, usage and

maintenance of this product..

The following symbols are used to identify important safety information on the
product and in this manual:

!

DANGER!
Safety ha zard.
Risk of sev ere
injury or d eath

DANGER!
Hazardo us
Voltage. R isk of
lethal or s evere
electri c shock.

WARNING!
Fire hazard

WARNING!
LED light
emission. Risk
of eye inju ry.

WARNING!
Refer to us er

=

to the earth excellently. And the power connection must be operated by the
professional technician.

=Make sure that the working voltage will not higher or lower than the rated

value.

=Make sure that the cable didn't be damage or lacerated by sharp.
=The light must be power off when it's standing idle or before clearing.
=The cable must with plug, and you must pull out the cable by handle the plug.
=Please be careful when installing the lighting. Never touch the bared cable, or

it will cause the deadly electric shock.

=Please use the suitable and safe cable to connect the light.
=Please never remodel the light randomly, we will not take the guarantee for the

faulty and damage which caused by dismantle、repair or remodel of the
nonprofessional person.

=Maximum ambient temperature 40°C. Do not operate fixture at temperatures

higher than this.

=Never connect the device to a dimmer pack.

This light belongs to grade I protection device, therefore the light must connect

4

2.INTRODUCTION

Specifications

l

4 x10 W RGBW

8°-40° Ζοοm

Battery

l Duration 9 hours full white,
l 20 hours color fade
l 4-hour fast charge from flight case,
l 8 hours in slow charge with PowerCon
l More than 1,000 charge/deplete cycles
l No memory effect
l No acid leaks

Voltage Rating: AC100V～240V 50-60Hz

lPower Rating: 50W

lLED Quantity:
lLens:
lIngress Protection: IP65 /indoor(option)
lProduct Size: mm

lN/W:6Kgs

240x191x286

Dimensions