ShorePower WU-120 Product Manual

Level One Electric Vehicle Charging Station

Wall Mount

Product Guide

Model # WU-120

ShorePower Technologies
2351 NW York St.
Portland, OR 98664
503-892-7345

[e-mail]
www.shorepower.com

2

Table of Contents

Warnings
Installation & Mounting
Usage
Maintenance & Cleaning
Troubleshooting
Features & Specifications
Accessories
Warranty
Other ShorePower Products

P.2
P.4
P.9
P.10
P.11
P.12
P.13
P.14
P.15

3

Installation & Mounting

1. Using Diagram 1, mark
the mounting bolt pattern
on your mounting surface

2. Drill Pilot holes into the
mounting surface (Follow
the fastener recommen­dations as to the depth
and diameter of the pilot
hole. Different materials
will require different fas­teners and pilot holes. I.e.
Steel, Concrete, Wood.

3. Install appropriate fasten­ers through each of the
four corners of the station
from inside the station.
See picture.

4

4. Locate the wiring conduit
knockout at the base of
the charging station. Se­lect which knockout to
punch by sizing against
your conduit diameter.

5. Remove the selected
knockout.

6. Insert the conduit pass
through hardware into
the knockout hole

5