¨
YA-V1824 and YA-GV1824
YA-V1824 Yamaha 2X4X74-1/2 Wide Frame Wht
2 4300199 ST215/75R14C Tire/MSlvr Spiral Rim
1 62340 Literature Bag - Trailers
1 6605701 Frame Bundle - YA-1824
1 66061 Hardware Bag - YA-1824 Bulk
Tire Size & Carrying
Capacity Chart
Tire Load Carrying
Size Range Capacity
ST215/75R-14 C 1870 lb.
Refer to tire side wall for proper tire pressure.
YA-GV1824 Yamaha 2X4X74-1/2 Wide Frame Galv
2 4300198 ST215/75R14C Tire/Galv.Spiral Rim
1 62340 Literature Bag - Trailers
1 6605700 Frame Bundle - YA-GV1824
1 66061 Hardware Bag - YA-1824 Bulk
Axle Adjustment
Approximate Tongue Weights for Best Towing.
Slide the water vehicle either forward or backward on
the trailer until the proper tongue weight has been
achieved.
Model Tongue Weight/lbs.
YA-V1824 5% to 7% of gross weight
YA-GV1824 5% to 7% of gross weight
Material List for the YA-V1824 and YA-GV1824 Frame Drawing
NOTE: ShoreLand’r offers their product line in either galvanized or painted finish. When ordering parts it is important that
you specify the finish or color you have on your product. The five digit number along with a two digit space _ _, notes the
parts which can be purchased with various finishes. When ordering these items use the five digit prefix and include the
following two digit suffix for proper finish.
Suffix Finish / Color
00 or G Galvanized
01 Arctic White
03 or BK Black
REF# PART# DESCRIPTION QTY REF# PART# DESCRIPTION QTY
1 6034010 JACK INSIDE SPACER ZYU ..................... 1
2 6034110 JACK RETAINER PLATE ZYU .................. 1
3 60403-- 2-7/8" BUNK BRACKET............................. 2
4 60929-- WINCH HOLDER CASE ............................ 1
5 60931-- 9"WINCH BASE ......................................... 1
6 6107503 END CAP - BLACK PROFILE 2000 .......... 2
7 61294-- 3-7/8" BUNK BRACKET............................. 2
8 65541-- TONGUE 3X5X55 ...................................... 1
9 66056-- FRAME WMENT YA-V1824 ...................... 1
10 66650 BUNK ASSY W.BRKTS 9 FT..................... 2
11 0110037 HH 3/8-16 X 1 1/4 CS GR5........................ 2
12 0110059 HH 3/8-16 X 3 3/4 CS GR5........................ 4
13 0110096 HH 1/2-20 X 1-1/2 ...................................... 1
14 0110114 HH 1/2-13 X 4 CS GR5 .............................. 2
15 0110118 HH 1/2-13 X 4 1/2 CS GR5........................ 2
16 0110125 HH 1/2-13 X 5 1/2 CS GR5........................ 1
17 0110170 HH 9/16-18 X 3 1/4 CS GR5...................... 4
18 0140040 HH 3/8-16 X 1 CS GR5 .............................. 12
19 0140090 HH 1/2-13 X 1 CS GR5 .............................. 2
20 0210130 CARR 3/8-16 X 3 3/4 GR5......................... 2
21 0210204 CARR 1/2-13 X 1 1/4 GR5......................... 2
22 0810126 SCREW SELFTAP TYPE B 1/4X1/2 ......... 4
23 0810925 SCREW SELFDRILL HWH #10-16 X 3/4 .. 2
24 0810930 SCREW SELFTAP #10-12X1 1/4 TYPE A 8
25 0810945 SCREW SELFDRILL 1/4-14X3/4.............. 1
26 1310170 WASHER #10 USS FLAT .......................... 2
27 1340030 LOCKWASHER 3/8 S/T MED .................... 2
28 1340095 WASHER USS FLAT 3/8 ........................... 6
29 1340100 WASHER USS FLAT 1/2 ........................... 1
30 1410109 HEX NUT FINISH 3/8-16 ........................... 2
31 1410209 HEX LOCKNUT 1/2-20 .............................. 1
32 1440101 FLANGE LOCKNUT SMALL 3/8-16 .......... 18
33 1440102 FLANGE LOCKNUT SMALL 1/2-13 .......... 9
34 1440259 HEX LOCKNUT 9/16-18 GRA ................... 4
35 2210155 CHAIN 3/16X20 LINK CHAIN .................... 2
36 3100010 COUPLER #980 P2 ASSEMBLED ............ 1
37 3310050 800 LB SWIVEL JACK ............................... 1
38 3510022 GROMMET 7/16IN MOLDED ................... 1
39 3510030 GROMMET 7/8IN MOLDED ..................... 9
40 3510065 4" BOW ROLLER - BLACK........................ 1
41 3510122 LIGHT BEZEL - WHITE ............................. 6
42 3510158 PLASTIC DRIVE RIVOT ............................ 12
43 3510542 MOLDED REAR CROSSMEMBER PAD .. 2
44 5110013 DRY LAUNCH LIGHT ASSY (LEFT) ......... 1
45 5110014 DRY LAUNCH LIGHT ASSY (RIGHT)....... 1
46 5110045 3 LIGHT CLUSTER 1994 LEXAN ........... 1
47 5110100 METAL FRAME CLIP - SMALL ................. 1
48 5110112 MARINE YELLOW CLEARANCE LIGHT .. 4
49 5110127 REFLECTOR ANDERSON AMBER .......... 2
50 5110348 BO LICENSE PLATE BRACKET ............... 1
- 5110349 HARNESS TONGUE 7FT ........................ 1
- 5110354 HARNESS FRAME 2X4 LEFT 17FT 2 .... 1
- 5110355 HARNESS FRAME 2X4 RIGHT 17FT 2.. 1
- 5110365 WIRE 2X5 TANDEM FENDER RIGHT.. 1
- 5110455 DO-RAY DOUBLE GROUND WIRE.......... 2
51 LH308 CUP WASHER ........................................... 2
52 S-3390 STEP PAD RIGHT 2 1/2 X 7 .................. 1
53 S-3391 STEP PAD LEFT 2 1/2 X 7..................... 1
54 S-3510 TONGUE COVER PLATE ......................... 1
55 S-3179G 2X6 BUNK BRKT SPUN GALV. ................ 4
56 S-3207G SPRING BRKT BUSHING PLATED ZYU .. 2
DECALS:
-- 4850360 NMMA CERTIFIED TRAILER DECAL....... 1
-- 4810709 TRAILER CAUTION/WARN DECAL ......... 1
-- 4850370 DECAL YAMAHA PRODUCT .................... 2
-- 4811349 DECAL PROFILE 2000.............................. 2
-- 4811358 DECAL CLR W/BLK LTRS PROFILE........ 1
ACCESSORIES AND/OR OPTIONS:
-- 65710-- AXLE ASSY YA-V1824
-- 66316-- WINCH CASE ASSEMBLY - YAV1824
-- 66157 BUNK ASSY 9’ W/BRACKETS
-- 66386-- TONGUE ASSY YA18/1924
Material List for the YA-V1824 and YA-GV1824 Chasis Drawing
REF# PART# DESCRIPTION QTY
1 66154-- AXLE WMENT (74 WIDE) ......................... 1
2 0110170 HH 9/16-18 X 3 1/4 CS GR5 ...................... 2
3 0210130 CARR 3/8-16 X 3 3/4 GR5......................... 1
4 0310170 SUB 1/2" X 2-5/16"X6-1/2.......................... 4
5 1340206 WASHER 1.5 OD X .765 ID X .186/.206... 2
6 1410229 HEX LUGNUT 1/2-20 13/16 OD Z&U........ 10
7 1440101 FLANGE LOCKNUT SMALL 3/8-16 .......... 1
8 1440102 FLANGE LOCKNUT SMALL 1/2-13 .......... 8
9 1440259 HEX LOCKNUT 9/16-18 GRA ................... 2
10 1440349 HEX NUT SLOTTED PLAIN ...................... 2
11 1540038 COTTER KEY 1/8 X 1 1/2 ......................... 2
12 3510132 AXLE PAD 12IN BLK ................................ 1
REF# PART# DESCRIPTION QTY
13 4300199 ST215/75R14C TIRE/MSILVER DIR RIM. 2
-- 4300198 ST215/75R14C TIRE/GALV DIR RIM ....... 2
14 4410089 SPINDLE SLEEVE 1 1/4-3/4IN BRG........ 2
15 4410130 SEAL 1 3/8IN ............................................ 2
16 4410246 SL BEARING PROTECTOR BRA ............. 2
17 4410247 BEARING BUDDY - STAINLESS STEEL.. 2
18 4440160 ROLLER BEARING 1 1/16IN................... 2
19 4440170 ROLLER BEARING 1 3/8IN..................... 2
20 4470400 HUB 1 3/8 X 1 1/16 CAST ....................... 2
21 4610048 SPRING 5 LEAF HOOK ........................... 2
22 S-3387 2" PLASTIC CHANNEL BRACKET ........... 1
23 S-3409G SPRING CLAMP 1/4X1 1/2X4 ZYU ....... 2
24 S-3449G SPRING AND AXLE U-BOLT PLATE........ 2
Parts Drawing
NOTE: Optional equipment
and replacement parts must
be purchased through an
authorized ShoreLand’r
dealer.
Final Assembly Instructions
Remove the small parts from the frame by cutting the
bands. Remove the bolt bag and sort all nuts and
bolts by size.
Tongue:
Install tongue into nose cone of trailer frame.
Thread tongue harness through the tongue cover.
Secure the tongue plate cover (Ref.#58) and rear of
the tongue with a 1/2” X 1-1/2” hex bolt, 1/2” flat
washer and hex lock nut. Secure the front of the
tongue channel to the tongue with a 1/2” X 4” hex bolt
and 1/2” flange lock nut. Tighten both bolts. Tighten
bolts but do not over tighten. Match tongue harness
wires with the correct frame harness wires and plugin. Ground the grounding wire (white wire with ring) to
the tongue cap plate using a 1/4” X 3/4” self drill
screw. Wiring is complete.
Safety Chain:
Insert 3/8” X 1-1/4” hex bolt with a 3/8” flat washer
and safety chain through the lower hole on the front
of the tongue. Secure with 3/8” flat washer and 3/8”
flange lock nut. Repeat procedure on opposite side of
the tongue.
Coupler:
Install the coupler to the tongue with one (1) 1/2” X
4” hex bolt and two (2) 1/2” X 1” hex bolts. Secure
with 1/2” flange lock nuts. Refer to parts drawing for
placement.
Winch Stand:
Secure the winch stand to the tongue with a 1/2” X
4” carriage bolt and 1/2” flange lock nut. Install the
winch handle on the winch and secure with the
special hardware provided with the winch.
Axle:
Place one of the spring bushings (Ref.#60) into the
rear of the spring bracket and secure with a 9/16” X
3-1/4” hex bolt and lock nut. Position the axle under
the frame, then hook the spring loop around the
bushing already installed. Raise the axle assembly
up so that the front of the springs line up with the front
spring bracket hole. Insert the two (2) 9/16” X 3-1/4”
hex bolts and lock nuts. Tighten all nuts and bolts but
do not tighten. Allow the spring room enough to
move.
Mount the tire and rim using 80-90 ft. lbs. torque on
lug nuts using a proper tightening procedure.
Bunk Assembly:
Mount the bunk assemblies to the fixed bunk
bracket on the frame using 3/8” X 1” hex bolts and
secure with 3/8” flange lock nuts.
!Caution!
1. To prevent damage to the water vehicle hull,
place the water vehicle on the trailer, loosen the 3/8”
X 1” hex bolts so that the bunks conform to the hull of
the water vehicle. Tighten the 3/8” X 1” hex bolts. (Do
not overtighten - bunks must pivot.)
2. To prevent damage to the trailer, water vehicle
or towing vehicle, tighten all nuts and bolts before
towing.
3. The law requires that the white wire on both the
tongue and tow vehicle wire harness be grounded to
the trailer and towing vehicle.
Springs:
Mount the springs to the axle with two (2) 1/2” X 61/2” axle u-bolts from the top down. Install the spring
clamp (Ref.#23) on top of the spring under the Ubolts. Install the spring plate (Ref.#24) under the axle.
Tighten the 1/2” flange lock nuts evenly.
Made in the USA Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 0002750
www.shorelandr.com
REV - 7/31/00
Loading...