ShoreLand'r TA0152 User Manual

ACCESSORY

TA0152-03

DIY Side Rail Attaching Bracket Kit for Powersports & SL Utility Trailers

The TA0152-03 can be used on the following trailers:

PS4X8 (3” frame) PS5X10 (3” frame)
PS5X14 (4” frame) PS6X12 (4” frame)
2ATV (3” frame) 3ATV (3” frame)

Phased out models (After Sept. 1, 2008):

2200U (4” frame) 1400U (3” frame)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003927
Page 1 REV A 04/16/2008

Mounting Instructions:

Mount channel brackets in locations along the sideframe

evenly spaced according to your trailer specications. The

U-bolts can be either mounted from the inside of the frame

Mount the boards to the channel brackets using 1-1/2” HH
screws. Refer to Detail B.

out (shown in Detail B) or from the outside frame in. Refer to
Detail A. Secure with 3/8” lock washer and 3/8” hex nuts.

The 2200U and 1400U: The entire trailer can be tted with

side rails with additional kits and lumber purchased. (Note

Purchase required boards according to the specications of

that ramps will have to be removed.)

your trailer from your local lumber yard.

The PS4X8 - PS6X12 and 2ATV/3ATV: These trailers can

The boards purchased can be either 2x4 or 2x6 pieces cut

to your specications.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003927
Page 2 REV A 04/16/2008

be tted with 3 sides of rail. The ramp end is open for ramp

use only.