ShoreLand'r TA0140 User Manual
ACCESS ORY
TA0140
Front / Side Stop Kit - 6’ Wide
The TA0140 front stop kit is a 6 ft. wide stop that ts on the front frame tube of the PS6X12 trailer. It will also mount on the side
frame of the trailer creating a side stop rail in the event that one is desired for this trailer.
The TA0140 can also be used on other PS (Power Sport) series trailers as a side stop rail depending on the axle positioning of
the trailer it is being installed on. The TA0140 is designed and is supplied with two different size U-bolts so it can be mounted to
either a 2X3 or 2X4 side frame.
The spacing of the upright mounting channels on the TA0140 can be mounted on either the inside or the outside of the frame.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003891
10/15/07
Installation Instructions
• Locate the hardware bag and sort all items by size.
• Locate and determine the correct size U-bolts needed to
mount the TA0140 to the side frame of the trailer it is going to
be mounted on.
• Determine the location where the TA0140 Front/Side Stop
Kit is going to be mounted. The TA0140 can be mounted on
either the inside or the outside of the frame tubing. If it is to be
mounted on the inside of the frame tube, the upright mounting
channels will be placed between the deck planking and the Ubolts inserted from the outside in.
• Holding the TA0140 in the desired position, place a U-bolt
over the frame tube between the deck planking and insert the
legs of the U-bolt into the mating holes provided in the upright
mounting channels.
• Place on a 3/8” at washer, lock washer, and hex nut. Hand
tighten.
• Repeat the above step on the other upright mounting channel.
• Once it is determined that the stop is in its correct location,
tighten the U-bolts securely.
• Place the black plastic end caps onto the ends of the TA0140
tube.
• Assembly is complete.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003891
10/15/07
Loading...