ShoreLand'r SLXR2313BSW User Manual V.2

®
SLXR2313BSW
SLXR2313BSW Bundles Required:
ST185/80R13C Tire/TS Dir Rim .................2
(or)
ST185/80R13C Tire/Galv Dir Rim ..............2
66520 Bag with Chains, No Coupler .....................1
69082 Literature Bag - Brakes - Trailers ...............1
80326-- Frame Bundle - 2X4W XR2313BSW .........1
66996-- Tongue Assembly 55”, W/UFP Actuator .....1
00 .........Galvanized
01 .........Arctic White
03 .........Black
33 .........Galvanized w/Black Plastic Parts
Table of Contents: Page
Frame Drawing & Bill of Materials ................................2-3
XR Assembly Instructions .............................................3
Tongue & Safety Chain Dwg/BOM. ..............................4
Safety Instructions ........................................................ 5
Tongue & Safety Chain Assy Instr. ...............................5
White Ground Wire/Brakeline Assy Instr ......................5
Profile 2000 Winch Dwg/BOM ..................................... 6-7
Winch Post Assembly Instructions ...............................7
Spring Assembly Instructions .......................................7
Axle Assembly Instructions ...........................................7
One Axle Brake Installation Instr ..................................7
Chassis Drawing & Bill of Materials ..............................8-9
Tire Size & Carrying Capacity Chart .............................9
Tire & Wheel Assembly ................................................9
Trailer Adjustments ....................................................... 10
Axle Adjustments ......................................................10
Rear Support System Adjustment .............................10
Roller Adjustment ......................................................10
Front Roller Support Adjustment ...............................10
Winch Post Adjustments ........................................... 10
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003411
Page 1
Diagram A
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003411
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove parts and sort by size.
XR SERIES
The XR-series roller rack is installed by placing the roller arm assembly mounting channel over the rear cross mem­ber and securing in place with a 1/2” x 4-1/2” hex bolt and lock nut. (See Diagram A). Note that it should be left loose until the boat is placed on the trailer. Once the proper posi­tions is determined, it may be tightened. Repeat on the other roller arm assembly.
The short stabilizer bunk is installed to the adjustable bunk bracket on the front cross member with a 3/8” x 1” hex bolt and lock nut. (See Diagram A).
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003411
Page 3
Loading...
+ 7 hidden pages