ShoreLand'r SLV22S User Manual V.1

®
SLV22S
SLV22S Bundles Required
62340 Literature Packet - Trailers 61395 Coupler Bag w/Chains 80431-- Frame Bundle 2x3 V22S ST185/80R13-C Dir Rim 60493-- Tongue 60” 2x3 Frame
ShoreLand’r offers their product line a painted nish. When ordering parts it is important that you specify the nish or color you have on your product. The ve (5) digit number along with a two (2) digit space _ _, note the parts which can be purchased with various nishes. When ordering these items use the ve (5) digit number along with a two (2) digit sufx for the proper nish.
00..........Galvanized
01..........Arctic White
03..........Black
33..........Galvanized w/Black Plastic Components
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003703
Page 1 11/02/06
Table of Contents: Page
Frame Drawing & Bill of Materials ................................2-3
Safety Instructions ........................................................3
Coupler & Safety Chain Dwg/BOM...............................4
Tongue Assembly Instructions ......................................4
Wire Harness Instructions ............................................4
Safety Chain Assembly Instructions .............................4
Winch Post Assembly Instructions................................4
Winch Dwg/BOM. ......................................................... 5
Chassis Drawing & Bill of Materials ..............................6-7
Spring Assembly Instructions ....................................... 8
Axle Assembly Instructions ...........................................8
Tire/Wheel Assembly ....................................................8
Tire Size & Carrying Capacity Chart .............................8
Bunk Dwg/BOM/Assembly Instructions ........................9
Trailer Adjustments .......................................................10
Axle Adjustments .......................................................10
Rear Support System - Bunk.....................................10
Front Support System - Bunk ....................................10
Winch Post Adjustments............................................10
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003703
Page 2 11/02/06
Refer to your ShoreLand’r Owner’s Guide and other decals on trailer for
additional information.
SAFETY INSTRUCTIONS
4810709
Proper tongue weight must be maintained.
Rev C 8/28/06
Before towing, check the following to ensure that:
1. All parts, bolts, nuts and wheel lug nuts are tight.
2. All wheel lug nuts must be tightened to a minimum torque rating of 85 ft/lb.
3. Lug nuts must be re-torqued after the first 50 miles, then periodically there after.
4. Tires are inflated to manufacturer’s standards. (See tire sidewall)
5. Wheel bearings have adequate grease.
6. Hitch ball is the proper diameter and has a rating equal to or greater than the GVWR of the trailer.
7. Coupler is properly attached and secured to coupler ball.
8. Trailer safety chains are crossed under the tongue and attached to towing vehicle.
9. All lights are operational. Note: It is recommended that the trailer lights be disconnected before backing into the water.
10. Tie downs, winch strap and bow­ eye safety chain are secure.
11. Trailer tongue jack is in up or travel position.
ASSEMBLY INSTRUCTIONS
Remove all items from the frame. Locate the hardware bag and sort all items by size.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003703
Page 3 11/02/06
Loading...
+ 7 hidden pages