ShoreLand'r SLRB40TBXLW User Manual V.2
®
SLRB40TBXLW
SLRB40TBXLW Bundles Required:
4300241 ST175/80R13C MR Tire/TS Dir Rim ...........2
(or)
4300240 ST175/80R13C MR Tire/Galv Dir Rim ........ 2
66520 Bag with Chains, No Coupler .....................1
62340 Literature Bag - Trailers ..............................1
80314-- Frame Bundle - 2X4W RB40TBXLW ......... 1
66996-- Tongue Assembly 55”, W/UFP Actuator .....1
62168 Bunk Assy Rear Bunk Kit - RB ...................2
ShoreLand’r offers their product line in either galvanized or
painted finish. When ordering parts it is important that you
specify the finish or color you have on your product. The five
(5) digit number along with a two (2) digit space _ _, note the
parts which can be purchased with various finishes. When
ordering these items use the five (5) digit number along with
a two (2) digit suffix for the proper finish.
00 .........Galvanized
01 .........Arctic White
03 .........Black
33 .........Galvanized w/Black Plastic Parts
Table of Contents: Page
Frame Drawing & Bill of Materials .............................. 2-3
RB Assembly Instructions ........................................... 3
Tongue & Safety Chain Dwg/BOM/Assy Instr. ............ 4-5
Safety Instructions ...................................................... 5
Tongue Assembly Instructions .................................... 5
White Ground Wire Installation ................................... 5
Safety Chains Assembly Instructions ......................... 5
Brake Line Installation ................................................ 5
Profile 2000 Winch Dwg/BOM/Assy Instr. ................. 6-7
Chassis Drawing & Bill of Materials ............................ 8-9
Tire Size & Carrying Capacity Chart ........................... 9
Rocker Arms Assembly Instructions ........................... 9
Spring Assembly Instructions ..................................... 9-10
Axle Assembly Instructions ......................................... 10
One Axle Brake Installation Instructions ..................... 10
Tire & Wheel Assembly .............................................. 10
Trailer Adjustments ..................................................... 10-11
Axle Adjustments ........................................................ 10
Rear RB Support System ........................................... 11
Front Roller Support System ...................................... 11
Winch Post Adjustments ............................................. 11
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003459
Page 1
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003459
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove
parts and sort by size.
RB SERIES
The RB-series rear bunk assembly is installed by placing the bunk assembly mounting channel over the rear
cross member and securing in place with a 1/2” x 41/4” hex bolt and lock nut. (See Diagram A). Tighten
only enough to hold in position until the boat is placed
on the trailer. Repeat on the other RB-bunk assembly.
The short stabilizer bunk is installed to the adjustable
bunk bracket on the front cross member with a 3/8” x
1” hex bolt and lock nut. (See Diagram A, Detail B).
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003459
Page 3
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003459
Page 4
Loading...