ShoreLand'r SLR40TBXLW User Manual V.2
®
SLR40TBXLW
SLR40TBXLW Bundles Required:
4300241 ST175/80R13C MR Tire/TS Dir Rim ...........2
(or)
4300240 ST175/80R13C MR Tire/Galv Dir Rim ........ 2
66520 Bag with Chains, No Coupler .....................1
62340 Literature Bag - Trailers ..............................1
80295-- Frame Bundle - 2X4W R40TBXLW ........... 1
66996-- Tongue Assembly 55”, W/UFP Actuator .....1
ShoreLand’r offers their product line in either galvanized or
painted finish. When ordering parts it is important that you
specify the finish or color you have on your product. The five
(5) digit number along with a two (2) digit space _ _, note the
parts which can be purchased with various finishes. When
ordering these items use the five (5) digit number along with
a two (2) digit suffix for the proper finish.
00 .........Galvanized
01 .........Arctic White
03 .........Black
33 .........Galvanized w/Black Plastic Parts
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003458
Page 1
Table of Contents: Page
Frame Drawing & Bill of Materials .............................. 2-3
Roller Assembly Instructions ...................................... 3
Tongue & Safety Chain Dwg/BOM ............................. 4-5
Safety Instructions ...................................................... 5
Tongue Assembly Instructions .................................... 5
White Ground Wire Installation ................................... 5
Safety Chains Assembly Installation .......................... 5
Brake Line Assembly Instructions .............................. 5
Profile 2000 Winch Dwg/BOM/Assy Instr. ................. 6-7
Chassis Drawing & Bill of Materials ............................ 8-9
Tire Size & Carrying Capacity Chart ........................... 9
Rocker Arms Assembly Instruction ............................. 9
Spring Assembly Instructions ..................................... 9-10
Axle Assembly Instructions ......................................... 10
One Axle Brake Installation ........................................ 10
Tire & Wheel Assembly .............................................. 10
Trailer Adjustments ..................................................... 10-11
Axle Adjustments ........................................................ 10
Rear Support System ................................................. 10-11
Rollers ........................................................................ 11
Front Roller Support System ...................................... 11
Winch Post Adjustments ............................................. 11
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003458
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove
parts and sort by size.
R SERIES
The R-series roller rack is installed by placing the
roller arm assembly mounting channel over the rear
cross member and securing in place with a 1/2” x 41/2” hex bolt and lock nut. (See Diagram A). Note that
it should be left loose until the boat is placed on the
trailer. Once the proper positions is determined, it may
be tightened. Repeat on the other roller arm assembly.
The short stabilizer bunk is installed to the adjustable
bunk bracket on the front cross member with a 3/8” x
1” hex bolt and lock nut. (See Diagram A).
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003458
Page 3
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003458
Page 4
Loading...