ShoreLand'r SLR2313BSW User Manual V.2
®
SLR2313BSW
SLR2313BSW Bundles Required:
ST185/80R13C Tire/TS Dir Rim .................2
(or)
ST185/80R13C Tire/Galv Dir Rim .............. 2
66520 Bag with Chains, No Coupler .....................1
69082 Literature Bag - Trailers .............................. 1
80280 -- Frame Bundle - 2X4W R2313BSW ........... 1
66996-- Tongue Assembly 55”, W/UFP Actuator ..... 1
ShoreLand’r offers their product line in either galvanized or
painted finish. When ordering parts it is important that you
specify the finish or color you have on your product. The five
(5) digit number along with a two (2) digit space _ _, note the
parts which can be purchased with various finishes. When
ordering these items use the five (5) digit number along with
a two (2) digit suffix for the proper finish.
00 .........Galvanized
01 .........Arctic White
03 .........Black
33 .........Galvanized w/Black Plastic Parts
Table of Contents: Page
Frame Drawing & Bill of Materials ................................2-3
Roller Assembly Instructions ........................................3
Tongue & Safety Chain Dwg/BOM. ..............................4
Safety Instructions ........................................................5
Tongue Assembly Instructions ......................................5
White Ground Wire Installation .....................................5
Safety Chain Instructions .............................................5
Brake Line Instructions .................................................5
Profile 2000 Winch Dwg/BOM/Assy Instr. ................... 6-7
Spring Assembly Instructions ....................................... 7
Axle Assembly Instructions ...........................................7
Chassis Drawing & Bill of Materials .............................. 8-9
Tire Size & Carrying Capacity Chart .............................8
One Axle Brake Installation .......................................... 9
Tire & Wheel Assembly ................................................9
Trailer Adjustments .......................................................10
Axle Adjustments ...................................................... 10
Rear Support System Adjustment .............................10
Roller Adjustment ......................................................10
Front Roller Support Adjustment ...............................10
Winch Post Adjustments ...........................................10
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003408
Page 1
Diagram A
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003408
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove parts
and sort by size.
R SERIES
The R-series roller rack is installed by placing the roller arm
assembly mounting channel over the rear cross member and securing in place with a 1/2” x 4-1/2” hex bolt
and lock nut. (See Diagram A). Note that it should be
left loose until the boat is placed on the trailer. Once
the proper positions is determined, it may be tightened. Repeat on the other roller arm assembly.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Diagram A).
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003408
Page 3
Loading...