ShoreLand'r SLR18LN User Manual

SLR18LN

SLR18LN Bundles Required

62340 Literature Packet - Trailers
61395 Coupler Bag w/Chains
80414-- Frame Bundle 2x3N R18LN
* ST175/80R13-C Dir Rim

60493-- Tongue 60” 2x3 Frame

ShoreLand’r offers their product line a painted finish. When
ordering parts it is important that you specify the finish or color
you have on your product. The five (5) digit number along with a
two (2) digit space _ _, note the parts which can be purchased
with various finishes. When ordering these items use the five (5)
digit number along with a two (2) digit suffix for the proper finish.

00..........Galvanized

03..........Black

Table of Contents: Page

Frame Drawing & Bill of Materials.................................2-3

Safety Instructions.........................................................3

Coupler & Safety Chain Dwg/BOM...............................4

Tongue Assembly Instructions.......................................4

Wire Harness Instructions.............................................4

Safety Chain Assembly Instructions..............................4

Winch Post Assembly Instructions................................5

Winch Dwg/BOM...........................................................5

Chassis Drawing & Bill of Materials...............................6-7

Spring Assembly Instructions........................................8

Axle Assembly Instructions............................................8

Tire/Wheel Assembly.....................................................8

Tire Size & Carrying Capacity Chart..............................8

Adjustable Bunk Bracket Dwg/BOM..............................9

Cross member Pad Dwg/BOM.......................................9

Roller Dwg/BOM/Assembly Instructions.........................10

Trailer Adjustments........................................................11

Axle Adjustments........................................................11

Rear Support System - Roller.....................................11

Front Support System - Roller....................................11

Winch Post Adjustments............................................11

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0003694
Page 1 of 12 Rev A 4/27/2011

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0003694
Page 2 of 12 Rev A 4/27/2011

ASSEMBLY INSTRUCTIONS Remove all item the frame. s from
Locate the hardware bag and sort all items by size.

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0003694
Page 3 of 12 Rev A 4/27/2011

WIRE HARNESS
Locate the wire harness. Push the two triangular plugs in the
hole on the top of the tongue, then out the rear of the tongue.
Place the wire harness through the hole in the tongue cover
plate. (See Detail A) Secure the tongue cover plate in position
with a 1/2” X 1-1/2” hex bolt and 1/2” lock nut. Tighten. Plug the
tongue wire harness ends into the frame harnesses by matching
colors and ends. Push the extra wire into the rear of the tongue
or remove the grommets in the side frame and place the extra
wire in the side frame. Replace grommets just removed.

TONGUE
The tongue comes shipped separate of the frame. Locat e and
slide the tongue in the front tongue channel. Line the holes in
the tongue with the holes in the tongue channel. Secure with a
1/2” X 4” hex bolt and 1/2” lock nut in the front cross hole.

Locate the coupler bag. Place the coupler on the end of the
tongue, align holes and secure with one 1/2” X 4” hex bolts and
hex flange lock nuts in the rear coupler hole. Place two 1/2” X 1”
hex bolts into the front holes of the coupler and secure to the
each side of the tongue with 1/2” flange lock nuts. Tighten.

SAFETY CHAINS
Mount the safety chains to the front of the tongue by placing a
3/8” flat washer onto a 3/8” X 1-1/4” hex bolt, then insert the bolt
through the last link of the safety chain. Put the bolt through the
hole on one side of the tongue as shown. Place on another flat
washer and secure with a 3/8” hex flange nut. Tighten. Repeat
on the other chain on the other side of the tongue.

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0003694
Page 4 of 12 Rev A 4/27/2011