ShoreLand'r SLB55TBBL User Manual V.1

®

SLB55TBBL

Bundles Required for SLB55TBBL

69082 Literature Bag - Trailers - Brakes 1
80345-- Frame Bundle - 2X5 - B55TBBL 1
4300238 ST215/75R 14C MR Tire / TS Dir Rim 4
67982-- Tongue Weldment 63” for UFP 1
6238600 Rocker Bag - Tandem 1
66541 Brake Kit Tandem Axle Connection 1
4510354 Actuator - 8000 lb. UFP 1
68185 2x5 Tandem Tongue Actuator Mtg Hdwe 1

ShoreLand’r offers their product line in either galvanized or painted
finish. When ordering parts it is important that you specify the finish
or color you have on your product. The five (5) digit number along
with a two (2) digit space _ _, note the parts which can be purchased
with various finishes. When ordering these items use the five (5) digit
number along with a two (2) digit suffix for the proper finish.

Table of Contents: Page

Frame Drawing & Bill of Materials ................................2-3

Bunk Assembly Instructions .........................................3

Tongue & Safety Chain Dwg/BOM/Assy Instr. ..............4

White Ground Wire Installation .....................................4

Actuator ........................................................................4

SP Winch Dwg/BOM/Assy Instr. ................................... 5

Chassis Drawing & Bill of Materials ..............................6-7

Tire Size & Carrying Capacity Chart .............................6

Rocker Arm Instructions ...............................................7

Spring Assembly Instructions .......................................7

Axle Assembly Instructions ...........................................8

Tire & Wheel Assembly ................................................8

Trailer Adjustments ....................................................... 8-9

Axle Adjustments ..........................................................8

Rear Support System Adjustment ................................8

00 .........Galvanized

01 .........Arctic White

03 .........Black

33 .........Galvanized w/Black Plastic Parts

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003470

Page 1

Bunk Adjustment ..........................................................8

Front Bunk Adjustment ................................................. 8

Winch Post Adjustments ...............................................8-9

Safety Instructions ........................................................ 9

Diagram A

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003470

Page 2

FINAL ASSEMBLY INSTRUCTIONS

Remove the hardware bag from the frame, remove parts and sort
by size.

B-SERIES BUNK ASSEMBLY

(See Diagram A, Detail C)
Locate two of the bunk support pivots and place one on each end of
one of the bunk equalizer arms attached to the rear cross member.
Position so the concave in the bunk support pivot is downward as
shown in Detail C, then align the holes in the bunk support pivot
with those in the equalizer arm.

sert into the holes in the bunk support pivot and the equalizer arm.
Secure the U-bolt in place by sliding a spacer bushing on one leg
of the U-bolt, then a ½” flat washer and ½” flange lock nut. Repeat
on the other leg of the U-bolt. Repeat on the other U-bolt on the
opposite end of the equalizer arm. Tighten the nut until it is securely
against the spacer and flat washer.

Place the front end of the bunk into the bunk bracket on the top
of the adjustable bunk bracket located on the front cross member.
Secure the bunk in the bracket using two No. 10 screws.

Locate one of the carpeted bunks. Note that one end of the bunk
has two galvanized plates with U-bolts extending below. Align the

Repeat the above process on the bunk on the other side of the
trailer.

legs of the U-bolts with the holes in the bunk support pivots, then in-

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003470

Page 3