ShoreLand'r SLB40TBBLW User Manual
®
SLB40TBBLW
SLB40TBBLW Bundles Required:
4300241 ST175/80R13C MR Tire/TS Dir Rim ..... 2
(or)
4300240 ST175/80R13C MR Tire/Galv Dir Rim... 2
66520 Bag with Chains, No Coupler ................ 1
62340 Literature Bag - Trailers ......................... 1
80254-- Frame Bundle - 2X4W B40TBBLW ...... 1
66996-- Tongue Assembly 55”, W/UFP Actuator 1
66541 Brake Kit - Tandem Axle Connection ..... 1
ShoreLand’r offers their product line in either galvanized or painted finish. When ordering parts it is
important that you specify the finish or color you have
on your product. The five (5) digit number along with
a two (2) digit space _ _, note the parts which can be
purchased with various finishes. When ordering these
items use the five (5) digit number along with a two (2)
digit suffix for the proper finish.
00 ....... Galvanized
01 ....... Arctic White
03 ....... Black
33 ....... Galvanized w/Black Plastic Parts
Table of Contents: Page
Frame Drawing & Bill of Materials ....................2-3
Tongue & Safety Chain Dwg/BOM/Assy Instr. .. 4
Safety Instructions ............................................ 5
Tongue & Safety Chain Assy Instr. ...................5
White Ground Wire Installation ......................... 5
Brake Line ........................................................5
Profile 2000 Winch Dwg/BOM/Assy Instr. .......6-7
Chassis Drawing & Bill of Materials .................. 8-9
Tire Size & Carrying Capacity Chart .................9
Rocker Arms ..................................................... 9
Spring Assembly Instructions ...........................9-10
Axle Assembly Instructions ...............................10
One Axle Brake Installation ..............................10
Dual Axle Brake Installation ..............................10
Tire & Wheel Assembly ....................................11
Trailer Adjustments ........................................... 11-12
Axle Adjustments .............................................. 11
Rear Support System .......................................11
Bunks ............................................................... 11
Front Bunk Support ..........................................11
Winch Post Adjustments ...................................11
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003453
Page 1
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003453
Page 2
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove
parts and sort by size.
B-SERIES BUNK ASSEMBLY
Locate the two 2 x 6 bunk assemblies. Note that the
bunk mounting brackets are assembled to the bunks
at the factory. Place the end with the two brackets towards the rear of the trailer. Place the assembly on the
equiload bunk arm and secure by placing a 3/8” x 1”
hex bolt through the bracket on the bunk and the ear
on the end of the equiload arm.
Secure in place using a 3/8” lock nut. Repeat on the
other end of the arm. (See Diagram A).
Place the other end of the bunk in the bracket installed
on the front cross member. Note that this bracket is
not attached to the bunk because the trailer can be adjusted to two different lengths. Once the proper position for the rear crossmember is determined, the front
of the bunk can now be attached to the bracket using
two- No. 10 x 1-1/4” self tapping screws as shown in
Detail B.
The 3/8” x 1” bolts attaching the bunks to the equiload
arms and front bunk bracket can be tightened but not
over tightened.
The bunks must be allowed to rotate slightly to conform to the boat bottom once the boat is set on the
trailer.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003453
Page 3
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003453
Page 4
Loading...