ShoreLand'r PWC14ALTL User Manual
PWC14ALTL
PWC14ALTL Bundle Requirements
62340 Literature Bag - Trailers 1
69125 Hardware Box - Single PWC 1
80457-- Frame Bundle PWC1200/1400L 1
ST155 X 80D 13C Bias Tire/Dir Rim 2
65265-- Tongue 65” Single - PWC 1
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003710
Page 1 11/08/06
Table of Contents: Page
Bundles Required ........................................................ 1
Trailer Drawing & Bill of Materials ............................... 2-3
Color Code Information ............................................... 3
Safety Instructions ....................................................... 3
Tongue Assembly Instructions. .................................... 4
Safety Chain Assembly Instructions ............................ 4
Coupler Assembly Instructions .................................... 4
Winch Post Assembly Instructions............................... 4
Axle Assembly Instructions .......................................... 4
Bunk Assembly Instructions......................................... 4
Misc. Information ......................................................... 4
Tongue Weight Adjustment ......................................... 4
Winch Dwg/BOM ......................................................... 5
Axle Dwg/BOM ............................................................ 6
Tire Size & Carrying Capacity Chart ............................ 6
Bunk Dwg/BOM ........................................................... 7
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003710
Page 2 11/08/06
Refer to your ShoreLand’r Owner’s
Guide and other decals on trailer for
additional information.
SAFETY INSTRUCTIONS
4810709
Proper tongue weight must be maintained.
Rev C 8/28/06
Before towing, check the following to ensure
that:
1. All parts, bolts, nuts and wheel lug
nuts are tight.
2. All wheel lug nuts must be tightened
to a minimum torque rating of 85 ft/lb.
3. Lug nuts must be re-torqued after the
first 50 miles, then periodically there
after.
4. Tires are inflated to manufacturer’s
standards. (See tire sidewall)
5. Wheel bearings have adequate
grease.
6. Hitch ball is the proper diameter and
has a rating equal to or greater than
the GVWR of the trailer.
7. Coupler is properly attached and
secured to coupler ball.
8. Trailer safety chains are crossed
under the tongue and attached to
towing vehicle.
9. All lights are operational. Note: It is
recommended that the trailer lights
be disconnected before backing into
the water.
10. Tie downs, winch strap and bow eye safety chain are secure.
11. Trailer tongue jack is in up or travel
position.
ShoreLand’r offers their product line in either galvanized or painted
nish. When ordering parts it is important that you specify the nish
or color you have on your product. The ve (5) digit number along
with a two (2) digit space _ _, note the parts which can be purchased
with various nishes. When ordering these items use the ve (5) digit
number along with a two (2) digit sufx for the proper nish.
00..........Galvanized
01..........White
03..........Black
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003710
Page 3 11/08/06
Loading...