ShoreLand'r LEXR40TCBLW User Manual
®
LEXR40TCBLW-01, LEXR40TCBLW-03, LEXR40TCBLW-08,
LEXR40TCBLW-14 & LEXR40TCBLW-22
LEXR40TCBLW (All Colors) Bundles Required:
ST215/75R14C OWL Tire/ Aluminum Star Rim ........ 2
(or)
ST215/75R14C OWL Mod Tire/Chrome w/Rivets
Rim ........................................................................... 2
66520 Bag with Chains, No Coupler .................................. 1
62340 Literature Bag - Trailers ............................................ 1
80142-- Frame Bundle - LEXR40TCBLW .............................. 1
67287-- Swing Tongue Assembly 65”, Disc Brake ................. 1
TA0028-__ Spare Tire Kit 2X4/5” Frames - 5 Bolt ...................... 1
68652-- Running Boards R/L 24” Custom .............................. 2
ShoreLand’r offers their product line a painted finish. When ordering
parts it is important that you specify the finish or color you have on
your product. The five (5) digit number along with a two (2) digit space
_ _, note the parts which can be purchased with various finishes.
When ordering these items use the five (5) digit number along with
a two (2) digit suffix for the proper finish.
01 .........Arctic White
03 .........Black
08 .........Pearl White
14 .........Blue
22 .........Red
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003281
Page 1 REV B 3/02/06
Table of Contents: Page
Frame Drawing & Bill of Materials ................................2-3
Safety Instructions ........................................................3
SwingTongue & Safety Chain Dwg/BOM/Assy Instr. ....4
Spare Tire Bracket Dwg/BOM/Assy Instr. .....................5
Profile 2000 Winch Dwg/BOM/Assy Instr. .................... 6-7
Chassis Drawing & Bill of Materials ..............................8-9
Tire Size & Carrying Capacity Chart .............................9
Rocker Arms Assembly Instructions .............................10
Spring Assembly Instructions ....................................... 10
Axle Assembly Instructions ...........................................10
Tire & Wheel Assembly ................................................10
One Axle Brake Installation Instructions ....................... 10
Dual Axle Brake Installation Instructions ...................... 10
Roller Assembly Instructions ........................................ 10
Trailer Adjustments .......................................................11
Axle Adjustments .......................................................... 11
Winch Post Adjustments ...............................................11
Installation of Rear Steps .............................................11
Diagram A
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003281
Page 2 REV B 3/02/06
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003281
Page 3 REV B 3/02/06
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame. Remove the parts and
sort by size.
TONGUE
The tongue is shipped separate of the frame. Locate the
appropriate tongue and install by sliding it in the front of the tongue
channel.
Line the holes in the tongue with the holes in the
tongue channel. Install the 1/2” x 4” hex bolt in the
front cross hole and secure with a 1/2” lock nut.
Remove the wire harness from the rear of the tongue. Place the
wire harness and the brake line (If equipped with brakes) through
the hole provided in the tongue cover plate. (See Detail F).
Secure the tongue cover plate in position with the same 1/2” x 11/2” hex bolt that secures the back on the tongue to the tongue
channel of the frame. Secure with a 1/2” lock nut. Tighten both
bolts just installed.
Diagram B
Locate the brass brake line coupling. Remove the plastic cap and
thread the brake line coming out the rear of the tongue into one
end of the coupling. Bend the line in a smooth gradual radius being
careful not to kink the line. Bend so it can be mated to the brake
line from the side frame. Once aligned thread the side frame brake
line into the other end of the coupling. Tighten both lines into the
coupling.
SAFETY CHAINS
Locate the 1/2” x 5” hex bolt. Slip the bolt through a 1/2” flat washer, then
place through the last link of one of the safety chains provided.
Place the bolt with chain attached through the hole provided in the
bottom front of the actuator mount on the tongue. Place the second
chain on the portion of the bolt extending through the other side
of the tongue. Place on another 1/2” flat washer and hex lock nut.
Tighten.
Plug the tongue wire harness ends into the frame harnesses by
matching colors and ends. Push the extra wire provided either
into the rear of the tongue or else remove the grommet in the
side frame and place the extra wire in the side frame. Replace
grommet just removed.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003281
Page 4 REV B 3/02/06
Loading...