ShoreLand'r 69175 User Manual

69175--

Keel Cradle Assembly

Assembly Instructions

Open box and remove all parts and hardware bag. Open hardware bag and sort parts.

Place 64923_ _ front keel guide bracket over front cross member and align holes in bracket with those in the front cross and insert 3/8” X 3” carriage bolts from rear to front and secure 3/8” ﬂange lock nuts. Place cradle assembly with pin in center in the rear slot on top of the previously attached bracket with bent ends facing for-

ward. Take outer channel assemblies and place on top of bracket aligning holes and insert 3/8” X 3” hex bolts, secure with 3/8” ﬂange lock nuts. In the slots in the ends of the channel, insert 3/8” X 5” carriage bolts through cross member and secure 3/8” ﬂange lock nuts.

Load boat - Make necessary adjustments to center bracket and tighten nuts, tighten other nuts only enough to allow assembly to pivot freely.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003608

Page 1

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003608

Page 2