Shop-Vac XPO100B, XPO100 User Manual

Service Manual

Portable Oxygen

Concentrator

Models XPO100 and XPO100B

™

XPO

DEALER: Keep this manual. The procedures in this manual MUST be performed by a qualified technician.

For more information regarding

Invacare products, parts, and services,

please visit www.invacare.com

 WARNING

DO NOT USE THIS PRODUCT OR ANY AVAILABLE OPTIONAL EQUIPMENT WITHOUT FIRST COMPLETELY READING AND UNDERSTANDING THESE INSTRUCTIONS AND ANY ADDITIONAL INSTRUCTIONAL MATERIAL SUCH AS OWNER’S MANUALS, SERVICE MANUALS OR INSTRUCTION SHEETS SUPPLIED WITH THIS PRODUCT OR OPTIONAL EQUIPMENT. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS OR INSTRUCTIONS, CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL PERSONNEL BEFORE ATTEMPTING TO USE THIS EQUIPMENT OTHERWISE, INJURY OR DAMAGE MAY OCCUR.

 ACCESSORIES WARNING

INVACARE PRODUCTS ARE SPECIFICALLY DESIGNED AND MANUFACTURED FOR USE IN CONJUNCTION WITH INVACARE ACCESSORIES. ACCESSORIES DESIGNED BY OTHER MANUFACTURERS HAVE NOT BEEN TESTED BY INVACARE AND ARE NOT RECOMMENDED FOR USE WITH INVACARE PRODUCTS.

NOTE: Updated versions of this manual can be found at www.invacare.com.

™

XPO

2 Part No 1150748

TABLE OF CONTENTS

SPECIAL NOTES ................................................................................ 4

TYPICAL PRODUCT PARAMETERS .................................................... 5

Regulatory Listing .......................................................................................................................................6

SECTION 1—IMPORTANT SAFEGUARDS ............................................ 7

Operating Information...............................................................................................................................7

To Reduce The Risk Of Burns, Electrocution, Fire Or Injury To Persons...................................7

Radio Frequency Interference .................................................................................................................8

SECTION 2—COMPONENT REPLACEMENT ......................................... 9

Replacing the Gross Particle Filter or Filter Cover............................................................................9

Accessing XPO

2............................................................................................................................................................................. 9

Replacing the Inlet Filter .........................................................................................................................11

Replacing the Battery...............................................................................................................................12

Re-assembling the XPO

2 .......................................................................................................................................................13

Replacement Parts....................................................................................................................................13

SECTION 3—CHECKING O2 PURITY ................................................. 14

SECTION 4—ERROR CODES ............................................................. 15

LIMITED WARRANTY ..................................................................... 19

Part No 1150748 3 XPO

™

SPECIAL NOTES

Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. Refer to the following table for definitions of the signal words.

SIGNAL WORD MEANING

Danger indicates an imminently hazardous situation

DANGER

WARNING

CAUTION

which, if not avoided, will result in death or serious injury.

Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage or minor injury or both.

NOTICE

The information contained in this document is subject to change without notice.

 DANGER

DO NOT SMOKE while using this device. Keep all matches, lit cigarettes, candles or other sources of ignition out of the room in which this product is located and away from where oxygen is being delivered.

NO SMOKING signs should be prominently displayed. Textiles and other materials that normally would not burn are easily ignited and burn with great intensity in oxygen enriched air. Failure to observe this warning can result in severe fire, property damage and cause physical injury or death.

CAUTION

“Caution: Federal law restricts this device to sale or rental by or on order of a physician, or any other practitioner licensed by the law of the State in which he/she practices to use or order the use of this device.”

XPO

™

4 Part No 1150748

TYPICAL PRODUCT PARAMETERS

Direct Current

Type BF equipment

Attention - Consider Accompanying Documents

DO NOT smoke

Class II, Double Insulation

Power On/Off

DO NOT dispose of in household waste

Recycle

DO NOT use oil or grease

Keep dry

IPX1

Electrical Requirements: AC Power Supply: 100-240 VAC 50/60 Hertz

Rated Current Input: 1.0 amps at 120 VAC

Sound Level @ setting 2: <

Altitude: Up to 10,000 ft (3046 m) above sea level

Oxygen Concentration:* *Based on an atmospheric pressure of 14.7 psi (101 kPa) at 70°F (21°C)

Oxygen Flow: Pulse flow delivery. Bolus Volume Ranges From 300 - 840cc

Dimensions: 10” high x 7” wide x 4” deep (25.4 cm high x 17.8 cm wide x 10.2

Protected against dripping water

DC Power Supply: 11-16 VDC

3.3 amps at 18 VDC

45dBA weighted

87% to 95.6%, after initial warm-up period (approximately 5 minutes)

settings 1 to 5.

cm deep)

Weight: 6.0 lbs (2.72 kg); 1.3 lbs (0.68 kg) for supplemental battery

Part No 1150748 5 XPO

™

TYPICAL PRODUCT PARAMETERS

Battery Duration (times are approximate): Setting 1 = 3.5 hours

Setting 2 = 2.5 hours

Setting 3 = 2.0 hours

Setting 4 = 1.5 hours

Setting 5 = 1.0 hours

Battery Recharge Time:

4 hours

NOTE: Recharge time increases if battery is charging while unit is running.

Humidity Operating Humidity: 15% to 60% non condensing

Storage Humidity: up to 95% non condensing

Temperature Range: (All power sources)

Extended Temperature Range: (Using AC or DC adapters)

Operating temperature: 41°F to 95°F (5°C to 35°C)

Storage temperature: -2°F to 140°F (-20°C to 60°C)

Operating Temperature: 95°F to 104°F (35°C to 40°C) Continuous use - all settings

Extended Temperature Range (Using Internal Battery)

Operating Temperature: 95°F to 104°F (35°C to 40°C) Continuous use - settings 1, 2 and 3 45 minutes (max) - setting 4 30 minutes (max) - setting 5

Regulatory Listing

ETL certified complying with: EN 55011:1998

CISPR 11: 2003

IEC 60601-1; 2nd ed. 2005

IEC 60601-1-2; 2.1 ed.

IEC 61000-3-2:2005

IEC 61000-3-3:2005

UL 60601-1, 1st ed.

CSA 601.1 M90

XPO

™

6 Part No 1150748

+ 14 hidden pages