Shop Vac Ql20ts Owner's Manual
29
27
30
22
8
9
23
19
21
22
26
17
1
2
3
4
5
20
6
7
10
11
12
13
14
15
16
18
25
31
24
28
32
ITEM DESCRIPTION PART NO.
Standard Accessories:
10' (3.05m) x 11/4" (3.18cm) Hose
(2) Metal extension wands
10" (25.4cm) Combination nozzle w/ squeegee insert
11/4" (3.18cm) Crevice tool
11/4" (3.18cm) Round brush
11/4" (3.18cm) Gulper nozzle
Dual surface selector nozzle
MMooddeell QQLL2200TTSS
1 Screw truss head 1/4" x 3/4", type AB 15146-99-6
2 Screw #8 x 1/2Ph pan hd, type AB 15007-99-0
3 Handle 24105-00-9
4 Motor housing cover assembly 24106-75-9
5 Power cord 25800-09-5
6 Foam insert cover 24125-00-7
7 Cord retainer 24111-07-2
8 Switch box 24110-00-9
9 Switch 12100-26-9
10 Motor housing 24107-06-2
11 Inner housing, acoustical foam 12904-00-9
12 Upper motor gasket 20700-00-1
13 Ground screw 17008-99-6
14 Outer housing, acoustical foam 12905-03-0
15 Motor 17300-97-1
16 Wire nut 05001-99-5
17 Lower motor gasket 20716-00-7
18 Grid plate 88607-00-7
19 Ball float 00811-00-0
20 Strip gasket 20711-00-8
21 Lid cage assembly 89655-00-5
22 #10 x 3/4" Hex head screw 15039-99-3
23 Foam sleeve 90585-62-1
24 Full polyester filter 90637-00-0
25 Full filter frame 30037-00-6
26 High efficiency collection filter bag 91905-10-9
27 Tank assembly 10460-97-0
28 Metal tank clamp 01400-00-1
29 Rivet 03002-99-5
30 Handle 93551-00-0
31 Inlet fitting 21720-01-6
32 Screw #10 x 5/8" hex, type BF 15054-99-2
ITEM DESCRIPTION PART NO.
1 Dolly frame 21330-01-4
2 Clevice pin 21328-00-0
3 4" Plastic wheel (10.16cm) 21329-00-8
4 Axle 21332-00-2
5 2" Caster (5.08cm) 67720-00-3
1. Invert dolly frame and snap
ball casters into front holes.
Push axle through holes in both
axle clevis pins. Slide
wheels on ends of axle. Align
wheels and clevis pins
over rear of dolly frame and snap
axle clevis pins into holes provided.
2. Invert tank. Center the swivel casters with
tank inlet and snap dolly frame onto bottom of tank. Install filters as required. Replace tank
cover and make sure buckles are clamped securely over raised “Clamp” area on lid.
1
2
5
3
4
SC87517-33
Catalog 925-56-10
(6 Gal. s/s)
Limited One-Year Wrranty
Shop-Vac Corporation warrants all Industrial, Commercial, and
Contractor vacuum cleaners for one year from date of purchase to
correct by repair or parts replacement without charge any product
defect due to fautly material or workmanship, provided that the vacuum cleaner is not used for rental service.
Loading...