Shop-Vac E87 Series User Manual
A ATTENTION!
Read all safety rules carefully
before attempting to operate.
Retain for future reference.
A !!~~n~!!~~!s con-
signes de
securite avant
d'utiliser cet aspirateur.
Conserver ce guide pour s'y
reporter ulterieurement.
User manual.
Please review before operating vac.
BRAND/MARQUE/MARCA
A iATENCION!
Lea cuidadosamente todas las
reglas de seguridad antes de
empezar a operar. Conservelo
para futuras relerencias.
Wet/Dry Vacuum • Household and Workshop Use
A DANGER!
Never operate this unit when
flammable materials or
vapors are present because
electrical devices produce
arcs or sparks that can cause
a fire or explosion.
NEVER OPERATE
UNATTENDED!
A ?.!~~!er cet ~ra-
1
,_._
1
•
teur en presence de vapeurs
ou de matieres inflammables.
Les appareils electriques
produisent des arcs ou des
I
etincelles qui peuvent causer ··
~iit:::~~:· 1
Nunca opere esta unidad i
cuando existan materiales '
inllamables o vapores, ya que
los aparatos
electricos producen chispas que pueden causar un incendio o explosion.
Series E87
SHOP-VAC CORPORATION
2323 Reach Road, P.O. Box 3307
Wiliamsport, PA 17701-0307
(570) 326-3557
www.shopvac.com
SHOP-VAC CANADA
1770 Appleby Line
Bu~ington, Ontario L7L 5P8
(905) 335-9730
www.shopvac.ca
Shop Vac-Mexico, S.A. de C.V.
Felix Rougier 3832
Colonia Loma Bonita
Zapopan Jalisco, C.P. 45086
52 (33) 3188 6388
Patents Issued and l'ending.
Brevets delivnis et en instance.
Patentes expedidas y establecidas.
NUNCA OPERE SIN
AYUDA!
· @ 2011 Shop-Vac Corporation. All Rights Reserved.
I @ Shop-Vac Corporation 2011. Tous Droits Reserves.
I © 2011 Shop-Vac Corporation. Todos los Dereches Reservados.
87544-32
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the
following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
A WARNING -TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servic-
ing. Connect to a properly grounded outlet only.
See Grounding Instructions.
2.
Do not expose to rain - store indoors.
3.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
4. Use only as described in this manual. Use only Manufacturer's recommended attachments.
5.
Do not use with damaged cord or plug. If appliance is not working as n should, has been
dropped, damaged, left outdoors or dropped into water, contact Shop-Vac Corporation for
assistance.
6.
Do Not: pull or carry by cord, use cord as a handle, close a door on cord or pull cord around
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
7. Do not unplug by pulling on cord. To unplug, grasp the plug; not the cord.
8.
Do not handle plug or appliance with wet hands.
9.
Do not put any object into openings. Do not use with any openings blocked; keep free of dust,
lint, hair and
anylhi1g that may reduce air flow.
10. Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
11.
Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
12.
Do not use without dust bag and/or filters in place.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15.
Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where
they may be present.
16.
Do not use your cleaner as a sprayer of flammable liquids such as oil base paints, lacquers,
household cleaners, etc.
17.
Do not vacuum toxic, carcinogenic, combustible or other hazardous materials such as asbestos,
arsenic, barium, beryllium, lead, pesticides or other health endangering materials. Specially
designed
unns are available for these purposes.
18.
Do not pick up soot, cement, plaster or drywall dust without cartridge filter and collection filter bag
in place. These
are very fine particles that may pass through the foam and affect the performance
of
the motor or be exhausted back into the air. Additional collection filter bags are available.
19.
Do not leave the cord lying on the floor once you have finished the cleaning job. It can become
a tripping hazard.
20. Use special
care when emptying heavily loaded tanks.
21. To avoid spontaneous combustion, empty tank after each use.
22. The operation of a utilijy vac can result in foreign objects being blown into eyes, which can result
i1 eye damage. Always wear safety goggles when operating vacuum.
23. STAY ALERT. Watch what you
are doing and use common sense. Do not use vacuum cleaner
when you are tired, distracted or under the influence of drugs, alcohol or medication causing
dimi1ished control.
24.
WARNING! Do NOT use this vacuum cleaner to vacuum lead paint debris because this may
disperse fine lead particles into the air. This vacuum cleaner is not intended for use under EPA
Regulation
40 CFR Part 7 45 for lead paint material cleanup.
SAVE THESE INSTRUCTIONS
A WARNING-DO NOT LEAVE VACUUM UNATTENDED WHEN IT IS PLUGGED IN AND/OR OPERATING. UNPLUG UNIT WHEN NOT IN USE.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This appliance is
equipped with a cord having an equipment-grounding conductor and grounding plug. The plug
must be inserted into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
A WARNING - IMPROPER CONNECTION OF THE EQUIP-
MENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE
PERSON IF YOU ARE IN DOUBT AS TO WHETHER THE OUTLET IS
PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH
THE APPLIANCE - IF IT WILL NOT FIT THE OUTLET, HAVE A PROPER
OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the
plug illustrated in
sketch A. A temporary adaptor that looks like the adaptor illustrated in sketches
B and C may be used to connect this
plug to a 2-pole receptacle as shown
in
sketch B if a properly grounded
outlet is not available. The temporary
adaptor should be used only until a
properly grounded outlet
(sketch A)
can be installed by a qualified electrician. The green colored rigid ear, lug
or the like extending from the adaptor
must be connected to a permanent
ground such as a properly grounded
outlet box cover. Whenever the adap-
GROUNDING IIETllOOS
=;• I ;·· ADAPTER~
• METAL
SCREW
II
~
• I I TABFOR
GROUNDING SCREW
GROUNDING GROUNDED
PIN ounET BOX
(Al
(B) (C)
tor is used, n must be held in place by a metal screw.
IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BYTHE CANADIAN
ELECTRICAL CODE. Make sure that the appliance is connected to an outlet having the same
configuration as the plug. No adapter should be used
wnh this appliance.
EXTENSION CORDS
When using the appliance at a distance where an extension cord becomes necessary, a 3-conductor
grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating.
Use the table below to determine A W.G. wire size required. To determine ampere rati1g of your vacuum,
refer to nameplate located on rear of motor cover.
Before using appliance, inspect power cord for loose or exposed wires and damaged insulation. Make
any
needed repairs or replacements before using your appliance. Use only three-wire outdoor exten-
sion cords which have
three-prong grounding-type plugs and three-pole receptacles which accept the
extension cord's plug. When vacuuming liquids, be
sure the extension cord connection does not come
in contact with the liquid.
NOTE: STATIC SHOCKS ARE COMMON IN DRY AREAS OR WHEN THE RELATIVE HUMIDITY OF
THE AIR IS LOW. THIS IS ONLY TEMPORARY AND DOES NOT AFFECT THE USE OF THE APPLIANCE. TO REDUCE THE FREQUENCY OF STATIC SHOCKS IN YOUR HOME, THE BEST REMEDY IS
TO ADD MOISTURE TO THE AIR WITH A CONSOLE OR INSTALLED HUMIDIFIER.
UNPACKING AND SET-UP
1. Pull lid latches in an outward motion and remove tank cover and any accessories which may
have been shipped in
the tank.
2. Attach rear wheels and front casters following the instructions
and illustrations below.
3.
Before replacing tank cover, refer to Dry Pick Up or Wet Pick Up Operation in this manual to
ensure you have the proper filters installed and inlet deflector is positioned correctly for
your
cleaning operation.
4. Replace tank cover and apply pressure with thumbs to each latch until
It snaps tightly in place.
Make
sure both lid latches are clamped securely.
5. Insert long machine hose end with locking-nut into inlet of tank and tighten. Do not overtighten.
6. Attach the extension wands
(not standard with all • I
models) to the accessory end of the hose. Twist slightly } Ii,,,,___ I
to tighten the connection (Figure A). ......---
7. Attach one of the cleaning accessories (depending on
Volts
Total length of cord in feet
120V
25
50 100
150
Ampere Rating
More Not More
AWG
Than Than
0
-
6
18
16 16
14
6
-
10
18
16 14 12
10
-
12
16
16 14 12
12
-
16
14 12
Not recommended
your cleaning requirements) on the extension wands. Twist slightly to tighten the connection
(Figure
A).
8. Plug the cord into the wall ouHet. Your cleaner is ready for use.
I= ON,O =OFF
NOTE: MANY MORE USEFUL TOOLS ARE AVAILABLE AT YOUR LOCAL DEALER OR
SHOP-VAC" WEBSITE.
REAR WHEEL AND
FRONT CASTER ASSEMBLY
You will find two casters (b), two axle housings (c), two wheel plugs (d}, two wheels (e),and two
screws
wnh your wet/dry vacuum. Assemble as follows:
Loading...