Shop Fox D2751 User guide

D2751 Paddle Switch

Instruction Sheet

Phone #: [phone] • Online Tech Support: [e-mail] • Web: www.shopfox.biz

Introduction

The Model D2751 features a large ON/OFF

To reduce risk of serious burns,
electrocution or death when installing this
switch:

paddle with a removable safety key that can
be used to disable the switch. This switch is
designed to fit a

7

⁄8" x 1 1⁄2" rectangular hole.

• Only use this switch to replace an
existing machine switch that has
the same physical configuration and
equivalent electrical specifications/
ratings.

• Installation must only be performed
by an electrician or qualified service
personnel, and all applicable electrical
codes must be adhered to.

• Turn off and completely disconnect all
power sources to the machine before
installing the switch.

• Do not use this switch in wet or damp
locations, or near explosive fumes or
flammable liquids. It is not sealed or
rated for these environments.

• Make sure there is a verified machine
ground on the circuit this switch is
installed.

Specifications

Rated Voltage .............................125V/250V

Rated Current at 125V ........................... 16A

Rated Current at 250V ........................... 10A

Figure 1. D2751 safety paddle switch.

COPYRIGHT © JUNE, 2018 BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in China#HE19695

D2751 125V/250V Paddle Switch

Installation

When installing the D2751 switch, use the wiring
diagram in Figure 2 to ensure proper wire
connections.

This switch is intended to be connected to
stranded wire with insulated quick­disconnect crimp-type female wire
terminals having a

All crimps must be "pull-checked" to ensure
that wires are securely crimped and will
not fall out with moderate tension or when
exposed to normal machine vibration.

Verified
Ground*

Machine

1

⁄4" tab.

Operation

To turn the switch ON, make sure the safety key
is properly inserted, then flip the switch up.

To turn the switch OFF, flip the paddle down.

To disable the switch, turn the switch OFF, then
pull the yellow key from the switch and store it
in a well hidden or secure location.

Hot
Out

Out

125V Neutral

or 250V Hot

Rear View

of Switch

Hot

In

Power Source

In

125V Neutral

or 250V Hot

Figure 2. D2751 wiring diagram.

*The machine MUST be connected to a verified
ground. In the event of certain malfunctions
or breakdowns, grounding reduces the risk
of electric shock by providing a path of least
resistance for electric current.

-2-