Shogun Motorsports 848, 1098, 1198 User Manual
Ducati 848/1098/1198 (ALL) NO CUT Under Body
Frame Slider Installation Instructions
Part Number: 750-8309
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. Safely support engine when
removing the stock though engine stud. Shogun is not responsible for any part of your motorcycle for
any reason. Precisely measure location of cut and if in doubt at any point please call us before the install
process has begun. Some photos in this section are used for illustration examples only.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY Price each Part Numbers Descriptions
1 $25.00 99-FS-750-8309-L Black Left Side Puck
1 $25.00 99-HR-TH121250428 Socket Cap 12 X 1.25 X 428 Main Engine Through Stud
1 $0.50 99-HN-LN12125 12 x 1.25 Hex Flange Lock Nut
1 $15.00 428-9098 Left and Right Side Bell Type Spacer
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1 $25.00 99-FS-750-8309-R Black Right Side Puck
1 $0.50 99-HN-LN12125 12 x 1.25 Hex Flange Lock Nut
1 $15.00 428-9098 Right Side Bell Type Spacer
Frame Sliders: Left and Right hand frame sliders are the same. Left and Right hand spacers are the same
1. Make sure the vehicle is in a fixed secure position. Remove upper fairings.
2. Remove the main engine stud nut and washer. Proceed to remove the main engine stud.
3. Slide the right hand slider (99-FS-750-8309-R) and spacer (428-9098) over the supplied engine
stud and install engine stud through frame.
Sample Picture
4. Install left spacer (428-9098) and left hand slider (99-FS-750-8309-L) with provided nut (99-HNLN12125). Torque nut down to the OEM torque specifications. Re install body work.
Loading...