Shogun Motorsports 1000 User Manual

Kawasaki Ninja 1000 (11-13) NO CUT Frame
Slider Installation Instructions
Part Numbers: 750-4819, 750-4810

MADE IN THE USA!
Carefully read instructions in their entirety before the install

Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves.The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time. Shogun is not responsible for any part of your motorcycle for any reason. If you have
any questions please call us direct for assistance.

Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY Price each Part Numbers Descriptions

1 $20.00 99-FS-750-4819-L/R Black Left Side Puck
1 $20.00 99-FS-750-4810-L/R White Left Side Puck
1 $30.00 99-OF-750-4810-L/R Left Side Offset Black Anodized
1 $2.00 99-HB-SH10150045 Socket Cap 10 X 1.5 X 45 (Holds puck to offset)
1 $3.50 99-HB-SH10125090 Socket Cap 10 X 1.25 X 90 Main Engine Stud

Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1 $20.00 99-FS-750-4819-L/R Black Right Side Puck
1 $20.00 99-FS-750-4810-L/R White Right Side Puck
1 $30.00 99-OF-750-4810-L/R Right Side Offset Black Anodized
1 $2.00 99-HB-SH10150045 Socket Cap 10 X 1.5 X 45 (Holds puck to offset)
1 $3.50 99-HB-SH10125090 Socket Cap 10 X 1.25 X 90 Main Engine Stud

Frame Sliders: Left and right hand sliders, offsets and bolts are the same

Installation Steps:

1. Remove the upper and lower body panels. Follow these steps when removing body work.
Make sure you have a safe place to store all rivets and hardware.

Remove body Rivets (Note: Anything with a dull point can be used, we use a punch)

Remove the body work bolts on the left and right hand side