User Manual •
•
SB2184
Basic Phone
SB2184 User Guide
Please ensure the phone is placed in a dry and ventilated place without corrosive air.
!
FEATURES：
•
• Flash and Mute Feature
• Wall Mount Feature
Last Number Redial
TABLE OF CONTENT
PRODUCT OVERVIEW ..................................................................................... 2
1. SWITCH OPERATION................................................................................... 3
LOCK switch............................................................................................3
2. FUNCTION KEY OPERATION .......................................................................... 3
FLASH key (600ms).................................................................................... 3
MUTE key ............................................................................................... 3
REDIAL key .............................................................................................3
TROUBLESHOOTING GUIDE.............................................................................. 3
DECLARATION OF CONFORMITY ........................................................................ 3
1
SB2184 User Guide
PRODUCT OVERVIEW
7
6
1
4
Description:
1. TEL LINE jack
2. Handset Cord jack
3. REDIAL key
4. FLASH key
5. MUTE jack
6. Handset Cord jack
7. 0-9/*/# key
2 3 5
2
SB2184 User Guide
1. SWITCH OPERATION
LOCK switch
Use the keys provided in the package. The telephone allows all outgoing number if the key is
on red point. It cannot dial any outgoing number when the key is on green point.
2. FUNCTION KEY OPERATION
FLASH key (600ms)
In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press
REDIAL key or dial out another number.
MUTE key
While you are on the line, if you do not want the remote party to hear you, just press and
hold the MUTE key.
REDIAL key
In the handset off-hook mode, press this key to redial the last dialed number.
TROUBLESHOOTING GUIDE
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly to the handset cord jack at the base.
Ensure you have plug in the telephone cable from the telephone to the wall socket correctly.
If the problem persists, please check with your local dealer.
DECLARATION OF CONFORMITY
The telephone complies with the essential protective requirements and objectives of:
• EC R& TTE Directive 1999/5/EC
• EC Low Voltage Directive 73/23/EEC
• EC EMC Directive 89/336/EEC
And conforms to the following relevant harmonized standards:
• EMC: EN55022, EN55024
Safety: EN 60950
•
Created on 28
Please visit us at www.shirocorp.com
3
th
October 2005. SB2184 Basic Phone.
.
Loading...