Shinola Detroit User Manual

CERTIFICATE OF WARRANTY

Model Number:
Modèle:
Modellnummer:

Sold To
Vendu à:
Verkauft an:

Country/Date:
Pays/Date :
Land/Datum:

Sold By:
Vendu par:
Verkauft durch:

Retailer Stamp:
Cachet du revendeur:
Stempel des Händlers:

Numero del modelo:
型号:
モデル番 号:

Vendido a:
售予:
販売先:

País/Fecha:
国家/日期:
国/日付:

Vendido por:
出售方:
販売店:

Sello del vendedor:
零售商印章:
小売店のスタンプ:

At Shinola, we’ve made a lasting commitment to making

lasting things. World-class watches, beautiful leather goods,

high-integrity audio, thoughtful gifts, and a hotel. If it’s made,

we want to try to make it better.

With relentless optimism, tenacity, humor, and humility,

we help people shine in an understated way.

4

SCREW-DOWN CROWNS

CROWN FUNCTIONALITY

The components of your Shinola watch are made of the finest materials and have been rigorously inspected
to meet our strict criteria. Some Shinola watches feature a screw-down crown, which adds an extra level of
water-tightness. To safeguard your investment, it is important to understand how this type of crown works:

1 To make the crown operational, unscrew it from the case by turning it

counterclockwise until it releases. Once released, follow the instructions
for setting the time/date as described in the next sections.

2 To reseal the crown, press it in against the case until the threads engage,

and turn clockwise until tight. It is important to reseal your crown to
maintain water-tightness.

1

2

WATCH MODELS WITH DATE INDICATOR

PLEASE NOTE:

• If your watch features a date indicator, the date window might be in a different position from the one
depicted in this manual.

• Shinola timepieces have different movements. Depending on the movement, it may be necessary to adhere

to a specific time period when setting the date indicator. Before adjusting the date setting, please refer to
the instructions pertaining to the individual movement of the purchased timepiece.

CONFLICT-FREE DIAMONDS

Any diamonds used in Shinola watches have been purchased from legitimate sources not involved in funding
conflict and in compliance with United Nations resolutions. We hereby guarantee that these diamonds are
conflict-free, based on written guarantees provided by the supplier of these diamonds.

5

SINGLE TIME MODELS

SETTIN G THE TIME

1 Pull out the crown to position II.
(The watch stops.)

2 Turn the crown until you reach the
correct time.

3 Push the crown back to position I.

SINGLE TIME WITH DATE MODELS

SETTIN G THE TIME

1 Pull out the crown to position III.
(The watch stops.)

2 Turn the crown until you reach the
correct time.

3 Push the crown back into position I.

1

III

2

3

1

II IIII

2

3

SETTIN G THE DATE

1 Pull out the crown to position II.
(The watch continues to run.)

2 Turn the crown until the correct date appears.

3 Push the crown back to position I.

4 If setting the date between 9:30 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the following day.

6

1

III

2

3

CHRONOGRAPH MODEL 5020.B

DESCRIPTIO N OF THE D ISPLAY AN D CONTROL BUTTONS

Please note:

Before using the chronograph functions,
please ensure that:

- the crown is in position
(= normal position).

- the four chronograph hands are
precisely at zero position following
activation of push-button B. If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter

Chronograph Hands to Zero

I

Adjusting the

.)

Center stop-second

Minute hand

Hour hand

Minute counter

Hour counter

Second hand

Big date

A

I

B

SETTIN G THE TIME

1 Pull out the crown to position III.
(The watch stops.)

2 Turn the crown until you reach the
correct time.

1

II IIII

2

3

3 Push the crown back to position I.

SETTIN G THE DATE

1 Pull out the crown to position II.
(The watch continues to run.)

2 Turn the crown until the correct date appears.

1

II

2

3

3 Push the crown back to position I.

4 If setting the date between 9:30 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the following day.

7

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO

1

1 Pull crown out to position III.
(All four chronograph hands are in
their correct or incorrect zero position.)

2 Keep push-buttons A and B depressed

2

simultaneously for at least 2 seconds.
(The center stop-second rotates by
360° - corrective mode is activated.)

3 Press push-button A to single step the

3

center stop-second hand. Press and
hold push-button A to advance the center
stop-second hand quickly.
push-button B to advance to the next hand.

4

Press push-button A to single step the minute and the hour counter hands.
Press and hold push-button A to advance the minute and hour counter hands
quickly.

5

Return the crown to position I.

3b

Press

2

A

II IIII

B

2

BASIC FUNCTION (START / STOP / RESET)

Example

1 Start: Press push-button A.

2 Stop: to stop the timing, press push-button A.
once more and read the four chronograph
counters: 4 hr. / 20 min. / 5 sec.

3 Zero positioning: Press push-button B.
(The four chronograph hands will
be reset to their zero positions.)

8

1

A

B

5

4

3

1

6

3b

4b

5b

2

1

3

ACCUMULATED TIMING

Example

1 Start: start timing.

2 Stop: e.g., 15 min. 5 sec. following 1.

3 Restart: timing is resumed.

4 *Stop: e.g., 10 min. 5 sec. following 3.
The accumulated time = 25 min. 10 sec.

5 Reset: The three chronograph hands
are returned to their zero positions.

Please note:

* Following 4, the accumulation of the timing can be
continued by pressing push-button A (Restart/Stop, Restart/Stop,…)

INTERMEDIATE OR I NTERVAL TIMING

Example

1 Start: start timing.

2 Display interval:
e.g., 10 min. 10 sec. following 1.
Timing continues in the background.

*

3 Making up the measured time:
the four chronograph hands are quickly
advanced to the ongoing measured time.

4 Stop: (Final time is displayed).

5 Reset: The three chronograph hands are
returned to their zero positions.

Please note:

* Following 3, further intervals or intermediates can be
displayed by pressing B (display interval / make up measured time, …)

9

4

3

2

1

A

B

5

4

1

A

B

2

3

5

CHRONOGRAPH MODEL 5021.D

DESCRIPTIO N OF THE D ISPLAY AN D CONTROL BUTTONS

Please note:

Before using the chronograph functions,
please ensure that:

- the crown is in position I

(= normal position).

- the two chronograph hands are

precisely at zero position following
activation of push-button B. If the hands
are not precisely at zero, their positions
must be adjusted. (See the chapter

Adjusting the Chronograph Hands to Zero

Center stop-second

Minute hand

Hour hand

Minute counter

Date

.)

Second hand

A

I

B

SETTIN G THE TIME

1 Pull out the crown to position III.
(The watch stops.)

2 Turn the crown until you reach the
correct time.

3 Push the crown back to position I.

SETTIN G THE DATE

1 Pull out the crown to position II.
(The watch continues to run.)

2 Turn the crown until the correct date appears.

3 Push the crown back to position I.

4 If setting the date between 9:30 p.m. and 12:00 a.m.,
follow steps 1 through 3, but be sure to set the date to
the following day.

10

1

II IIII

2

3

1

III

2

3

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO

1 Pull crown out to position III.
(All two chronograph hands are in
their correct or incorrect zero position.)

2 Keep push-buttons A and B depressed
simultaneously for at least 2 seconds.
(The center stop-second rotates by 360°

- corrective mode is activated.)

3 Press push-button A to single step the
center stop-second hand. Press and
hold push-button A to advance the center
stop-second hand quickly.
push-button B to advance to the next hand.

4 Press push-button A to single step the
minute counter hand. Press and
hold push-button A to advance the
minute counter hand quickly.

5 Return the crown to position I.

3b

Press

BASIC FUNCTION (START / STOP / RESET)

Example

1 Start: press push-button A.

2 Stop: to stop the timing, press push-button A
once more and read the two chronograph
counters: 20min / 10sec.

3 Zero positioning: Press push-button B.
(The two chronograph hands will
be reset to their zero positions.)

4

3

2

A

1

II IIII

5

B

2

3b

2

1

A

B

3

11

ACCUMULATED TIMING

Example

1 Start: start timing

2 Stop: e.g., 15 min. 5 sec. following 1.

3 Restart: timing is resumed

4 *Stop: e.g., 13 min. 5 sec. following 3.
The accumulated time = 28 min. 10 sec.

5 Reset: the three chronograph hands
are returned to their zero positions.

Please note:

* Following 4, the accumulation of the timing can be
continued by pressing push-button A (Restart/Stop, Restart/Stop,…)

INTERMEDIATE OR I NTERVAL TIMING

Example

1 Start: start timing.

2 Display interval:
e.g., 10 min. 10 sec. following 1.
Timing continues in the background.

*

3 Making up the measured time:
the two chronograph hands are quickly
advanced to the ongoing measured time.

4 Stop: e.g., 28 min. 10 sec. following 1.

5 Reset: the three chronograph hands
are returned to their zero positions.

Please note:

* Following 3, further intervals or intermediates can be
displayed by pressing B (display interval / make up measured time, …)

12

4

3

2

1

A

B

5

4

1

A

B

2

3

5

CHRONOGRAPH MODEL 5030.D

DESCRIPTIO N OF THE D ISPLAY AN D CONTROL BUTTONS

Please note:

Before using the chronograph functions,
please ensure that:

- the crown is in position I
(= normal position).

- the three chronograph hands are
precisely at zero position following
activation of push-button B. If the hands
are not precisely at zero, their positions
must be adjusted. (See the chapter

Adjusting the Chronograph Hands to Zero

Center stop-second

Minute hand

Hour hand

Minute counter

Hour counter

.)

Second hand

A

I

B

Date

SETTIN G THE TIME

1 Pull out the crown to position III.
(The watch stops.)

2 Turn the crown until you reach the
correct time.

1

II IIII

2

3

3 Push the crown back to position I.

SETTIN G THE DATE

1 Pull out the crown to position II.
(The watch continues to run.)

2 Turn the crown until the correct date appears.

1

III

2

3

3 Push the crown back to position I.

4 If setting the date between 9:00 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the following day.

13

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO

1 Pull crown out to position III.
(All three chronograph hands are in
their correct or incorrect zero position.)

2 Keep push-buttons A and B depressed
simultaneously for at least 2 seconds.
(The center stop-second rotates by 360°

- corrective mode is activated.)

3 Press push-button A to single step the
center stop-second hand. Press and
hold push-button A to advance the center
stop-second hand quickly.
push-button B to advance to the next hand.

4 Press push-button A to single step the hour counter hand.
Press and hold push-button A to advance the hour counter
hand quickly.

5 Press push-button A to single step the minute counter hand. Press
and hold push-button A to advance the minute counter hand quickly.

4b

3b

Press

Press push-button B to advance to the next hand.

6 Return the crown to position I.

BASIC FUNCTION (START / STOP / RESET)

Example

1 Start: press push-button A.

2 Stop: to stop the timing, press push-button A
once more and read the three chronograph
counters: 1h / 20min / 10sec.

3 Zero positioning: Press push-button B.
(The three chronograph hands will
be reset to their zero positions.)

14

5

4

3

2

A

1

II IIII

6

B

2

3b

4b

2

1

A

B

3