Shinkawa Sensor Technology SD-1C2 User Manual

Integration guide for Shinkawa Sensor Technology, Inc.

SWiNS Series Smart Wireless Network Sensing System , model SD-1C2

This module is for use in Shinkawa Sensor Technology, Inc. SWiNS Series Smart
Wireless Network Sensing System.
CAUTION — Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

SWiNS Series Smart Wireless Network Sensing System must be labeled with:
Contains FCC ID: XBNSD-1C2

Installation locate : Field (in room or out of room)
Purpose : Condition measuring
Power supply : AC adapter, external battery or internal battery

Installation instruction: Do not locate above objects emitting heat more than 50℃.
Locate away from direct sunlight.

Location of RFID P.W.B