SHINING 3D S3D EINSCAN SE Instructions

Preparation

Scanner Assembly

Scanner Assembly

Software Installation

Unpacking Checklist

① ② ③

Scanner Head Turntable

④ ⑤ ⑥

Calibration BoardScanner Bracket

⑦ ⑧ ⑨

Power AdapterPower Cord

⑩

USB Cable B

Quick Guide

PC Requirement

Scanner Stand

Calibration Board Holder

USB Cable A

Turntable Assembly

Place the turntable onto scanner stand.

STEP

02

STEP

01

Scanner Head

Assembly

Place the scanner head

onto the bracket.

STEP

03

Connect the Scanner to a Computer

Plug USB cable into back of scanner and computer

USB port.

②

⑦

Connect the Scanner to turntable

Plug USB cable into back of scanner, and turntable.

Software Download

Download software and user

①

⑩

⑧⑨

manual from

http://www.einscan.com/soft-

ware-download.

STEP

01

Download & Service

Run the Installer

Double click to run the

installation wizard and follow

the installation instructions.

STEP

04

Online Activation

STEP

02

STEP

03

License Acquisition

During installation, you need

to obtain license file online

to activate your scanner.

Make sure the scanner has

been connected well and

your computer is network-

ing so as to detect your

computer and validate your

license .

Quick Start Guide

Getting Started with EinScan-SE

Please prepare the PC with the following system
requirement .

Operating System:�

Port:
RAM:
Graphic Card:
Graphic Memory:
CPU:

Win7 / 8 / 10 / 64bit
at least One USB2.0 / 3.0 port
> 8 G
NVIDIA Series
> 1 G
i5 or higher

Screw the scanner into the socket

on the stand.

STEP

Connect the Power Supply

Plug power cord into outlet and the back of scanner.

05

STEP

Turn on the
Scanner

06

Press the touch switch

to turn the scanner on

for 1 second.

If you fail to get license online, Please contact your supplier or mail

your scanner serial number ( Sticker on the back of the scanner head )

to [e-mail] to get the license file. Save the

license file to your desktop. Click “local activation” and browse the

license file and “import” .

Online Activation

Local Activation

How to get a

Calibration Our Scan Process Our Scan Process

successful scan

STEP

Calibration Board

01

Assembly

Insert calibration board

onto the board holder.

STEP

02

Calibration Board
Placement

place the calibration board

on the center of the turntable

facing the scanner.

STEP

03

Run the Calibration:

Open software, choose your scanner model of EinScan-SE and go

to NEXT, Getting started with Calibration button, following the

on-screen instructions turn the calibration board in 3 directions.

NOTE: Rotate the calibration board only while calibration

Calibration tips

You should calibrate the scanner in the initial set-up, or IF YOU

MOVE THE SCANNER OR TURNTABLE.

When you find the scanned quality is not as good as initial set-up,

you can recalibrate your scanner.

Calibration needed when alignment mistake or failure frequent

appear during the scanning.

Do not touch or move the object during calibration.

What can be scanned?

Great to Scan Under
Auto Scan Mode

Objects larger than 30*30*30 mm (1.2*1.2*1.2 in)
Objects small than 250*250*250 mm (38*38*38 in)
Object weighing less than 5 kg (11 lbs)

Transparent objects like glasses

Shining or reflective objects like varnished metal

parts
Dark color object like black keyboard
Fuzzy objects like hair
Solution: Paint white powder on
objects will improve the scan quality.

Do NOT Suggest
to Scan

Moving objects
Hollow pattern object like Eiffel
Tower souvenirs
Objects smaller than 30*30*30 mm
(1.2*1.2*1.2 in)

Note: If object size and weight is out as mentioned
above, please scan on tripod without turntable by
Fixed Scan Mode.

Difficult to Scan

Build Project Edit Scan

Click “New Project” button

to start a new scan.

STEP

01

SHIFT+Left mouse: Select
redundant data, the
selected section will show as
red. The tool bar on the top
will allow you to do further
edit.

Texture Scan Option

Place object

make sure the Object will be
stable during the scanning.

Dark or

difficult

Bright

Bright & Dark

to scan

Medium

Scan

Click Scan button to start
scan

Choose texture Scan if color

texture is need for scan. Or,

choose nontexture scan

(Texture scan is taking little

longer time, and white

balance test should be done

before texture scan)

Adjust Brightness

Choose the brightness
setting according to your
object surface condition.

Too much red appears on

the object shown in the

window means over bright.

Note: Please check the

exposure instruction in user

manual

Complete the

scan in more

directions

Alignment

If automatic alignment failed

during scanning, you can use

(Misalignment is happen very

less. Please refer the detail of

manual alignment in User

When the scan is completed,

Watertight or Unwatertight

model can be selected due to

Save

Asc, stl, obj and ply are
available.

Manual

manual align .

manual)

Mesh

go meshing by .

your request.

Edit buttons:

1 Deselect

2 Revert

3 Delete

4 Undo

5 Show/Hide Stripes

Click to save data and exit the
single-piece edition

Sometime, if one rotate
can’t give you a full scan,
you can place the object

in other directions to

capture the missing faces.

After edit, and save the

current scanned data, the

current scanned data will

be aligned to the last scan

data automatically.

Watertight is closed model

can be printed directly.

Unwatertight model is a

nonclosed model keeping the

missing scanned area as it is,

which is usually chosen for

further design purpose in

Double click on the touch
switch to turn the scanner off.

other program.

HANGZHOU SHINING 3D TECH CO., LTD.

Email：[e-mail]
Address：No.1398 Xiangbin Road, Wenyan Street,

Xiaoshan District, Hangzhou, China

Support Contact

Skype：einscan_support
WhatsApp：[phone]
Email：[e-mail]

www.einscan.com www.shining3d.com