Shindy 17-842 User Manual

Digital Temperature Gauge 3V Dry Cell Part #17-842

Installation Instructions

*Please make sure to ground the battery

Using as a WATER TEMPERATURE GAUGE

Change the stock thermo-sender to the new PT1/8 Sender. The illustration below is an example, as different
motorcycles can have the stock sender installed in different areas. Please check your service manual for
clarification. Stock temperature warning light will not work, so be careful of high temperatures.

Using as an OIL TEMPERATURE GAUGE

Adapter Number

Plug Size

17-852S

12mm x P1.50

17-853S

14mm x P1.25

17-854S

14mm x P1.50

17-855S

16mm x P1.50

17-859S

18mm x P1.50

*In order to use the oil temperature gauge
capabilities, make sure you have selected and
separately purchased the appropriate adapter to fit
the plug size you need.