Shinco YPO6 User Manual

User Manual
YPO6 Series
Portable Air-conditioner
Page: 1/15
Thank you for selecting this new model portable air conditioner. Please read this owners manual carefully before operating the unit. Please keep this manual in a safe place for future reference.
Page: 2/15
Contents
Important Safeguards.............………………………………………….…….…... 3
Function Description……………….……………………………….…………...…. 4
Features and Parts…………………………………………………….…………….4
Installation…………………………………………………..…………………. …….5
Control Setting…………………………………………………………….………….8
Water Drainage Methods………..…………………………………………………10
Maintenance…………………………………..………………….………….………11
End of Season Storage………………..……………………………………………11
Handling of the Unit……………………………………………………………….…12
Troubleshooting……………………….………………………………………….…13
Appendix………………………….……………………………………….…….……14
Page: 3/15
Important Safeguards
Important safeguards:
·The appliance is for indoor use only. Read all instructions
·Rated Power Supply: Connect unit to a Grounded Power Source: 110-120VAC, 60HZ.
·Disconnect the power plug before dismantling, assembling or before cleaning unit.
·Avoid touching moving parts of the appliance.
·Never insert fingers, pencils or any other objects though the vent guard whenever the power
plug is connected, especially while running.
·The appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the unit safely.
·Young children should be supervised to ensure that they do not play with the appliance.
·Do not use the appliance for any other purposes than its intended use.
·The appliance must not be used if the guards are not fasten according to the instructions.
·When the power cord is damaged, it must be replaced by the manufacturer or a qualified
service agent to avoid hazard
·Do not use your appliance with an extension cord unless it has been rated and tested by a qualified electrician or electrical supplier
·For service, return unit to an authorized service agent.
·The air conditioner unit must always be stored and transported upright, otherwise you
may cause irreparable damage to the compressor; in case of doubt we suggest to wait for at least 24 hours before you start air-conditioning unit.
·Avoid restarting the air conditioning unit unless 3 minutes have passed since being turned off, or the compressor may get damaged.
·Never unplug the power cord plug to start or turn off the air conditioning unit. Use the ON/OFF switch located on the control panel.
·Always place the portable air conditioner on a dry level place.
•The appliance shall not be installed in the laundry room.
•The appliance must be positioned so that the plug is accessible. And it shall be installed in
accordance with national wiring regulations.
Energy Saving Tips
· Do not cover or restrict the airflow from the Outlet or Inlet grills.
· The minimum distance from furniture and wall should be 50CM (20 inches)
· Keep the filters clean. Under normal conditions, the filters should be cleaned approximately
every 30 days. Since the filters remove airborne particles, more frequent cleaning maybe necessary, depending on the indoor air quality.
· Set the fan speed switch to high cool and the thermostat to the coolest position for the initial
start-up, then set the fan switch to Low cool and lower the thermostat to a comfortable setting.
Suggestions:
For better efficiency, do not to use cooling function when ambient environment is higher than 35C (95F), or heating function when the ambient environment is lower than 7C (45F) .
Page: 4/15
Function Description
These series of mobile air-conditioners is available in two model lines: Cooling models and Cooling & Heating models. The Cooling only models offers Cooling, Dehumidifier, Fan air and Sleep Functions. The Cooling & Heating Models offer Cooling, Dehumidifier, Fan air and Heating Functions. The speed of the fan is adjustable between high & low fan speed, the temperature setting range is 17 - 300C (63F – 86F), and various protection functions such as (24h) timed ON/OFF setting.
Features and Parts
1. Features
·Brand new appearance and a compact streamline structure.
··The appearance of the unit is practical and elegant. The remote control can be stored on the right of the handle at the back of the unit, and the remote control features user-friendly memory design.
··The power cord with a universal jack design can be stored in the back of the unit for convenience and protection of the power cord.
·The position of the outdoor connector is placed high to allow for convenient assembly and smooth air flow of the heat exhaust hose.
·Timer start/shutdown function, with unique start/shutdown music.
·3 -minute delay compressor restart protection function and other protection functions.
·The snap-fit design of the heat exhaust hose allows for fast and easy installation of the unit.
2. Parts:
C clamp swivel hole
Vent C clamp swivel shaft
C clamp swings away off the back vent
Snap joint of the C clamp buckle on the back vent
1. Control panel 15. Lower air duct bottom
2. Horizontal louver 16. Wire-winding post
3. Vertical louver 17. Drain cap
4. Air outlet frame 18. Evaporator filter mesh
5. Vertical Louvre connecting lever 19. Evaporator filter frame
6. Caster 20. Radiating fine mesh
7. Top cap 21. Condenser filter mesh
8. Horizontal louver connecting lever 22. Condenser filter frame
9. Main vertical louver 23. Base plate
10. Front shell 24. Remote control
11. Handle and Remote Control holder 25. Heat exhaust hose end connector
12. Back shell 26. Heat exhaust hose
13. C buckle for heat exhaust hose snap 27. Window frame adaptor
14. Power cord 28. Circular connector
Page: 5/15
Installation Adjustment
1. Installation
Warning: leave this mobile air-conditioner in an upright position for at least 2
hours before first use.
This air-conditioner may be moved indoor conveniently; leave the air-conditioner in an upright position while moving it. The air-conditioner shall be placed on a flat ground surface. Do not install or operate this air-conditioner in a bathroom or other wet environments.
1.1 .Installation of the C shape buckle to the heat exhaust hose and unit
Figure 1 Figure 2
Loading...
+ 11 hidden pages