Shimpo Instruments DT-601CG Data Sheet

The Series DT-601CG counter is fully programmable, bi-directional and features an automatic multiplier,

can be used as a ”batch” counter/controller to count and display groups of articles such as cartons, cans, bottles etc. as well as allow adjustment factor for linear units totalization.

The DT-601CG comes standard with NPN input for connection with compatible NPN sensors. The DT-601CG provides power output to the sensors, eliminating the need for a separate power supply. NPN and photo relay alarm outputs are also standard.

allowing the unit to count up or down. This model

DT-601CG Panel Mount Counter

Features

• Bi-directional and batch counting capability eliminates need for multiple counters. One unit does it all.

• Expansive counting range (-999,999 to +999,999) enables usage in a variety of applications, ideal for fast moving part counting

• Fully scalable. Can convert process values to linear units

• Provides DC voltage to power various sensors; reduces cost by eliminating separate power supply

• Accepts a wide range of input voltages; eliminates need to stock dual units and/or additional transformers

• Counting process can be viewed easily from a distance with the large 6 digit LED display

• Selectable decimal point provides very high resolution, up to 1000th of a digit

• Memory backup saves time during a power failure (important setups are retained in memory)

• Auto or manual reset allows user to operate or the control to operate a reset

DT-601CG Specifications

Counter Type Bi-directional, batch

Display Range -999,999 - +999,999

Resolution 0, 0.0, 0.00, 0.000 (selectable)

Display 6 digit, LED, 0.56” high (14.2 mm)

Input NPN open collector pulse input

Output 2 NPN outputs, 2 photo MOS relay outputs

Input Signal Characteristics 10 milliamp minimum or dry contact

Sensor Power Supply 12 VDC (100mA max.)

Power Requirement 85 - 264 VAC, 50/60 Hz

Power Consumption 2 W

Ambient Temperature 32-113°F ( 0-45°C )

Product Weight 0.55 lb (250 g)

Package Weight 1.05 lb (476 g)

Dimensions 3.46 x 3.78” x 1.89” (88 x 96 x 48 mm)

Warranty 1 year

Included Accessories Mounting brackets (attached to unit), rubber gasket, sticker sheet with units of measure

Ordering Details

DT-601CG Panel Mount Counter Display with NPN input, alarm NPN/relay outputs, 100-240 VAC Power

Accessories

NPN (NO) sinking output 1.5 kHz frequency, LED indication, 6.5’ (2 m) cable, 0.08” (2 mm) sensing distance, NEMA 6 (IP67) rating

NPN (NO,NC) output, 300 Hz frequency, 0.32” (8 mm) sensing distance, 6.5’ (2 m) cable, NEMA 6 (IP67) rating, for use in high vibration areas

Photo sensor with NPN sinking output, 250 Hz activating frequency, 10’ (3 m) cable 1” to 3’ (25 to 914 mm) operating range

Photo sensor with NPN sinking output, 333 Hz activating frequency, LED status, 10’ (3 m) cable, NEMA 4 (IP65), 1” to 3’ (25 to 914 mm) operating range for light or dark activation.

Laser sensor with NPN/PNP (NO,NC) outputs, 1.5 kHz frequency, LED indication, 6’ (1.8 m) with quick disconnect connection, NEMA 6 (IP67) rating

Proximity Sensors

Retro-Reflective Photo Sensors

BI2-S12

MCS-3109

MCS-625

MCS-655

LS-S50MLR

DISTRIBUTED BY: