Shimpo Instruments DT-5TS Data Sheet

DT-5TS Economical Panel Indicator

The DT-5TS Economical Panel Indicator is ideal for speed and process time monitoring when combined with a compatible in-line sensor.

ed with features found in more expensive units, the DT-5TS Panel Indicator is extremely versatile with selectable inputs. The DT-5TS is fully scalable and possesses three selectable modes allowing it to measure and display RPM/linear speed/rate, elapsed time and process time. Each panel indicator accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square wave such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Typical applications can range from machine operation timing, rate of change monitoring such as on a conveyor, elapsed time of oven curing etc. with any variety of compatible sensor inputs desired.

Load-

Features

• Highly accurate (± 0.008% ± 1 digit) makes ideal for process control and analysis

• Large 6 digit LED display plus two smaller 6 digit secondary displays allow easy viewing from greater distances

• Scalable programming gives user the flexibility to set up and monitor virtually any process

• Selectable update time allows operator to speed up/slow down display changes to facilitate process

• Wide range power voltage (85 - 264VAC, 50/60Hz) eliminates need for having to purchase and wire an additional power transformer

• Great versatility with multiple sensor input capability in one unit: NPN open collector, contact and square or sine wave sensor inputs.

• Front cover protection eliminates accidental bumping of keypad to incorrect program

• IP66 front cover protection keeps water out, enables usage in compatible plant wash-down operations

• DC power source output to power compatible sensors saves money by eliminating need for separate power supply

• Selectable decimal point enables higher resolution display potential

• 1/8 DIN size panel cut out permits easy, industry-standard mounting

DT-5TS Specifications

Measuring Range

Display Range

Scalable Yes (with outputs, see modules)

Accuracy ± 0.008 % ± 1 digit

Display Update Time

Input No. of P/R 1 to 9,999 (programmable)

Input Signal Characteristics

Sensor Power Supply 12 VDC (150 mA)

Power Requirement

Ambient Temperature 32-113°F ( 0-45° C )

Product Weight 0.66 lb (300 g)

Package Weight 0.65 lb (295 g)

Dimensions 5.27 x 3.78x 1.89” (134 x 96 x 48 mm)

Warranty 1 year

Included Accessories

10 - 99,999 rpm (at 1 p/r),

0.2 - 30,000 rpm (at 60 p/r)

Tachometer/Rate Meter: 0 - 999999 with selectable decimal point Elapsed Time: 0:00:00 - 9:59:59 or

0.00- 999.99 sec Process Time: 0:00:00 - 0:59:59 or

0.00 - 999.99 sec

0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 seconds (selectable)

NPN open collector input: max. frequency 100 kHz / Contact input: max. frequency 20 Hz / Square wave input: max. frequency 30 kHz

- Sine wave input (magnetic pickup): max. frequency 10 kHz

85 - 264 VAC (50/60 Hz) Optional (9 - 35 VDC at 1 W also available)

Mounting adapters and mounting screws, decal sheet.

Ordering Details

DT-5TS

DT-5TS-DC

Panel Indicator with selectable inputs, 100-240 VAC Power

Panel Indicator with selectable inputs, 9-35 VDC Power

Accessories

BI2-S12

DJ2-G

Proximity Sensors

RetroReflective Photo Sensors

Rotary Pulse Generators

Magentic Pick-up Sensors

Slot Type Sensor

MCS-3109

SE-G

MCS-625

MCS-655

LS-S50MLR

RE1B-60C

RE1B-600C

RE1B-1000C

RE2B-30C

RE2B-60C

RE2B-600C

FPM-RE1B

MP-10

3030AN

CABLE-3030

3070XP12010

CM-SR21

CBL-75ANL

NPN (NO) sinking output 1.5 kHz frequency, LED indication, 6.5’ (2 m) cable, 0.08” (2 mm) sensing distance, NEMA 6 (IP67) rating

NAMUR output, 3 kHz frequency, zero-sensing capability, 6.5’ (2 m) cable, 0.08” (2mm) sensing distance, NEMA 6 (IP67) rating

NPN (NO,NC) output, 300 Hz frequency,

0.32” (8 mm) sensing distance, 6.5’ (2 m) cable, NEMA 6 (IP67) rating, for use in high vibration areas

Square wave output, 8 kHz frequency, LED indication, 18” (0.46 m) cable, 0.04” (1 mm) sensing distance,

Photo sensor with NPN sinking output, 250 Hz activating frequency, 10’ (3 m) cable 1” to 3’ (25 to 914 mm) operating range

Photo sensor with NPN sinking output, 333 Hz activating frequency, LED status, 10’ (3 m) cable, NEMA 4 (IP65), 1” to 3’ (25 to 914 mm) operating range for light or dark activation.

Laser sensor with NPN/PNP (NO,NC) outputs,

1.5 kHz frequency, LED indication, 6’ (1.8 m) with quick disconnect connection, NEMA 6 (IP67) rating

Single logic output (Logic “1” …supply voltage minus 2.5V or more, 10mA (max) / Logic “0”… less the 0.4V, 30mA max.), 60 pulses/ rev., 5000 rpm max., 10’ (3 m) cable

Single logic output (Logic “1” …supply voltage minus 2.5V or more, 10mA (max) / Logic “0”… less the 0.4V, 30mA max.), 600 pulses/ rev., 3000 rpm max., 10’ (3 m) cable

Single logic output (Logic “1” …supply voltage minus 2.5V or more, 10mA (max) / Logic “0”… less the 0.4V, 30mA max.), 1000 pulses/ rev., 1800 rpm max., 10’ (3 m) cable

Dual logic output (90° out of phase) for quadrature applications. Same logic as the RE1B Series. A zero position output for shaft position reference. 30 pulses/rev., 5000 rpm max., 1.6’ (.49 m) cable.

Dual logic output (90° out of phase) for quadrature applications. Same logic as the RE1B Series. A zero position output for shaft position reference. 60 pulses/rev., 5000 rpm max., 1.6’ (.49 m) cable.

Dual logic output (90° out of phase) for quadrature applications. Same logic as the RE1B Series. A zero position output for shaft position reference. 600 pulses/rev., 3000 rpm max., 1.6’ (.49 m) cable.

12” circumference wheel for use with RE1B and RE2B pulse generators

Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of

0.01” (0.25 mm) typical clearance, 10’ (3 m) cable

Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of

0.01” (0.25 mm) typical clearance, Amphenol connector

Optional cable for 3030AN

Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of

0.01” (0.25 mm) typical clearance, 10’ (3 m) cable Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3

For less dense materials that allows beam to penetrate through, NPN or PNP output with a 0.08” (2 mm) gap range, NEMA 4x (IP65) housing.

Optional cable for CM-SR21 16.4’ (5 m)