Shimpo Instruments DT-315P Data Sheet

DT-315P Battery Powered,

NEMA 4X Stroboscope

Series DT-315P Battery Powered, NEMA 4X Stroboscope for Harsh Applications.

rugged, sealed NEMA 4X (IP65) Stroboscope suitable for work-

ing in areas without AC power. The DT-315P works just like the

DT-315A battery operated strobe. Equipped with Phase shifting

in angle of delay (0-359 degrees) and flash time delay, (0-300

mSEC) the DT-315P is engineered for checking timing and wear

on rotating and reciprocating machinery. With its rugged, metal

body and NiCd rechargeable battery, the DT-315P provides the

maintenance and quality professional a rugged, accurate strobe-

tach for inspection on presses, conveyers, gear reducers, chain

drives, fuel injectors, paint spray patterns, and many other harsh

environment, industrial applications.

Features

• Extruded aluminum, NEMA 4X construction: Extraordinary durability yields long service life

• Internal battery supply: Lightweight; enables easy portability

• Repeatable accuracy (± 0.01% of reading): Fully meets the strictest tolerances

• Phase shift (in degrees of delay time): Enables visual analysis of rotating/reciprocating objects through all points of motion/time/angle

• Flash timer control: Prolongs flash tube life

• Manual flash controller knob: Permits easy/accurate adjustments to flash rate

• Continuous duty cycle: Eliminates downtime waiting for unit to cool

• Highly polished focused reflector: Prevents “blind” viewing areas

The DT-315P is a

Easy Operation Control

LED Display

Dial

Input Signal

SIG

MODE

X2 / ÷2

+/-

Change Operation from INTERNAL to EXTERNAL flash control

Internal Signal “MODE” (Flash) or External Trigger Control LED Changes to Indicate FPM (flash/min.), flash delay in degrees and flash delay in milliseconds

Adjust Flash Rate Settings Fast X2 or ÷2 flash rate setting when in “Internal” mode

Phase “SHIFT” Advance or Retard viewed motion in degrees or milliseconds

DT-315P Specifications

Flashing Range 60.0 ~ 3,000 FPM

Display Accuracy ±0.01%

Drift ± 0.01 (at 0 ~ 40° C)

Internal Mode

External Mode

General

Phase Shift Use +/- push buttons (360° in 6 seconds)

Display Update Time 0.2 sec approx

Output Signal Approx. 12V

Other Functions ÷2. x2 Flashings, Phase shift adjustment

Flashings Synchronous Mode: 60.0 ~ 3,000FPM / Delay mode:200 ~ 3,000 FPM

Delay Angle Setting Range

Display

Display Accuracy Synchronous mode: ± 0.01% plus ± 1 digit Delay mode:+ 0 -0.2mS plus ± 1 digit

Update Time 1 per second

Input Signal

Sensor Power

Setter Flashing, Delay angle: Jog Shuttle Mode, Display Unit: Tact Switch

Display 5 digit, 7 segment red LED (Character height 10mm)

Flashtube Xenon lamp TFU-100B-A32

Flashtube Power Max. 10W

Flashing Time Approx. 30 μ sec

Power

Operating Temperature 32 to 104 °F (0 to 40° C)

Power Requirement Power Plug & Cable for Recharging Battery Included

Product Weight Approx. 4.6 lbs (2.1 kg)

Package Weight 6.15 lbs (2.79 kg)

Dimensions 5.11” W x 6.22” H x 10.20” L (130 W x 158 H x 259 L mm)

Warranty 2-Year

Included Accessories Input/Output signal plug, rechargeable battery with AC adapter, protective case

Delay Mode: 0 ~ 359°, Set by 1°

RPM, Synchronous mode: 60.0 ~ 3000FPM Delay Angle, Delay mode: 0 ~ 359° or 0 ~ 300mS conversion display

H Level:2.5 ~ 12V L level:0 ~ 0.4V 50 μs or over for H.L. level Trigger at rising edge Approx. 10Ωimpedance

Battery:6.8 ~ 11.0V Adapter:10.2 ~ 12.2V DC:9 ~ 14.5V : 7.8 ~ 14.1V Max. 40mA (including max 0.6V Ripple)

Battery: Nicd battery, 8KR - 2000 sce SANYO, Operating time: Approx. 1 hour (full charge at 3000 FPM); Battery Charge Time: Approx. 10 hours Do not operate over 10 hours continuously External power: Disconnect the built-in battery before operating instrument by external power) DC9 14.5V, Max. 24W (current consumption is 24W/input voltage) or operate by provided adapter; AC115V 10%, 50/60 Hz Max. 40VA

Ordering Details

DT-315P

NIST-STROBE

DISTRIBUTED BY:

Harsh Environment NEMA 4X (IP65) Stroboscope with Included rechargeable battery, power cable and protective case

NIST traceable certificate for digital stroboscopes, includes data

Accessories

BAT-DT315A/P Internal battery for DT-315P

DT-315P-CHGR AC adapter/charger for DT-315P

FLASHTUBE-311-2 Replacement flash tube for DT-315P

SAS-DT300 Permanent mount swing arm