Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
SHIMPO’S
DT-209X / DT-209X-S12DT-209X / DT-209X-S12
Big things come in small packages
Demanded by loyal users of the popular DT-205L laser tachometers, Shimpo
responded by creating the DT-209X series of LASER combination hand held
tachometers. Based on the DT-205L with its rugged construction and quality
components; the DT-209X is equipped with DATA COLLECTION features
that adds flexibility in the field for Maintenance, Quality Control and R&D
professionals.
Simultaneous storage of data in three different measuring modes (USB, Standard,
and Average) both the DT-209X and DT-209X-S12 offer incredible value and ease
of use in Contact and Non-contact applications.
Enhanced download features and online controls, showing trending and real
time data via USB communication; you can easily access your data by the
free software included in each DT-209X package. USB and Analog output
included.
FEATURES
· 1/4 x 20 mounting hole
DT-209X Software
· 3 Modes of measurement (USB, STANDARD, AVERAGE)
Selectable units of measure and display refresh interval
·
· Graph capability in USB mode
· Data can be imported to spreadsheet reports
· Automatic data calculation for Last, Minimum, Maximum and Average readings
· Readings can be set for length and rate measurement
· Smart settings for trigger, max and min limits. (PC will beep indicating out of
range data)
· Synchronize time with PC for time stamping
· Multiple data storage in USB mode for different records
· Programmable 1-volt analog output for chart recorders
SHIMPO INSTRUMENTS 1701 GLENLAKE AVE. ITASCA, IL 60143 P: 800.237.7079 F: 630.924.0342 SHIMPOINST.COM
· Sophisticated laser beam detection;
up to 14'
· Exceptional accuracy
· Length and rate functions
· Multi-mode speed selection
· Length/sec available
· Hardy aluminum construction
· Large 5 digit display
· Expansive memory capacity
· Extended battery life
· Free N.I.S.T. certificate
DIMENSIONS
ALSO AVAILABLE
DT-209X shown in Carrying Case.
12" wheel FPM-12 & FPM-12CBL.
SPECIFICATIONS
MODEL DT-209X / DT-209X-S12
MEASURING RANGE 6 - 99,999 rpm
MEASURING RANGE CONTACT 0.8 - 25,000 rpm
ACCURACY ±1 rpm: 6 - 8,300 rpm / ±2 rpm: 8,301 - 25,000 rpm / ±0.006 % of reading / ±1 digit (or 7 rpm max.): 25,001 - 99,999 rpm
DISPLAY 5 digit 0.47””(12 mm) high LCD
rpm: (Non Contact up to 14’ away) Contact: ypm, mPM, fpm, ipm and Length; yd, m, ft, in, linear rate and length: using contact
MEASURING UNIT
adapter included and 6” or 12” circumference wheels.
MEASURING MODE USB mode; PC online measuring / standard (STD) mode; Standard measuring / Average (AVE) mode; Average data measuring
STD mode; 24 blocks, 10 points/block (Total; 240 data) AVE mode; 30 blocks (Last, Max, Min, Average data in each block)
MEMORY
Date and hour of start/finish are stored in each block. (Can download data with USB communication.)
USB COMMUNICATION USB 1.1
ANALOG OUTPUT Max. 1 V
DISPLAY UPDATE TIME 1 second (typical)
DETECTION Laser diode
SYSTEM CONTROL Single-chip C-MOS microprocessor
OVER RANGE INDICATOR Flashing numerals
VOLTAGE REQUIREMENT 2 AA / 1.5 V Batteries
LOW BATTERY INDICATOR Flashing ”LO BAT” display
AUTO POWER SHUT-OFF Yes (except USB mode)
BATTERY LIFE 15 hrs Approx.
OPERATING ENVIRONMENT Non-corrosive
OPERATING TEMPERATURE RANGE 32° - 113°F ( 0 - 45°C )
CONSTRUCTION Die-cast aluminum housing
WEIGHT DT-209X: 0.9 pound (400g) / DT-209X-S12: 1.0 pound (460g)
DIMENSIONS 6.6””L x 2.4””W x 1.8””H (167.5 mm x 60 mm x 46 mm)
WARRANTY 1 year
Reflective tape, 2 cone adapters, funnel adapter, 3 1/2” Extension shaft carrying case, NIST certificate, Master Wheel (6” cir.) and
STANDARD ACCESSORIES
200L adapter, USB cable, case, NIST certificate, Master Wheel (6” cir.) and 200L adapter, USB cable, Application software (CD-R)
SHIMPO INSTRUMENTS
Visit us at www.TestEquipmentDepot.com