Shimpo FGE-2XY, FGE-10XY, FGE-100XY, FGE-50XY, FGE-5XY Instruction Manual

Series FGE-XY Force Gauges
Operation Manual

Do not operate or store instrument in the following
locations:

Explosive areas, near water, oil, dust or chemicals; ar­eas where the temperatures can exceed 104°F
(40° C)

Take precaution to not drop the force gauge. Damage
to the sensor may occur.

Do not modify, disassemble or attempt to repair the
unit. Send to the factory for proper repair.

If upon delivery damage to the unit is detected, do not
operate the unit. Notify the shipping carrier immedi­ately to obtain damage claim instructions.

Only measure forces that are in line with the measur­ing shaft. Do not attempt to take any measurements
(tension or compression) at any angle. Failure to keep
measurements in line will damage the instrument.

The Series FGE-XY Digital Force Gauges combine a rugged, ergo­nomic and compact design with exceptional accuracy to provide
a solid force testing instrument. These instruments are utilized in
a variety of applications such as, incoming quality inspection, fin­ished goods testing, R&D or almost any portable or force stand
testing requirement.

Simple one button adjustment alters units, while pressing the
peak button quickly produces the highest recorded value during
the test. The 180° reversible display combined with the adjustable
force direction and dual labeled keypad enable the FGE-XY to
excel in both compression and tension applications in any direc­tion. Models are available from 0.5 lbs to 200 lbs ranges providing
a large offering for various testing requirements.

Typical applications include wallboard, wire pull, wire crimps, trig­ger pull, brake pedal, aerospace ceramic, springs, food ripeness,
corrugated paper strength, blister pack, medical component,
muscle strength, ergonomic testing, adhesives, syringe plunger,
needle sharpness and many more.

Specifications

Capacity: See Chart
Resolution: See Chart
Accuracy: ±0.2% F.S. @ 73°F (23°C)
Display: 4-Digit LCD, 0.5” (12 mm) high, Units 0.29” (7 mm).

Reversible. Minus sign for tension.

Display Update: 0.05, 0.1, 0.2, 0.3, 0.5, 1 sec
Sampling Rate: 1000 Hz
Overload Capacity: 200% of F.S. (200 lb.: 150% F.S.)
Power: Rechargeable Ni-MH battery or universal AC adapter/char-

ger (100 - 240 VAC, 50/60 Hz)

Auto Power Shut-Off: Yes (not active if adapter/charge is in use)
Battery Charge: 12 hours (when fully charged)
Recharge Time: Approximately 18 hours (when fully discharged)
Temperature Limits:
Dimensions: 5.8 x 3 x 1.5” (147 x 75 x 38 mm)
Product Weight: Approx. 1 lb (450 g); FGE-200XY Approx. 1.1

lb (500 g)
Package Weight: Approx. 2.25 lb ( 1.02 kg) for 0.5 lb and 1 lb
ranges; 2.4 lb (1.09 kg) for 2 to 100 lb ranges; 2.75 lb (1.25 kg) for
200 lb range.

Certification: CE, RoHS
Included Accessories: AC adapter/charger, carrying case,

hook, chisel, flat head, notched head, hanger, cone head, metric to
inch thread adapter, extension rod

PRODUCT DIAGRAM

2