Shimpo FG-7000T-3, FG-7000T-1, FG-7000T-2 Data Sheet

The FG-7000T Series digital torque gauges pro­vide testing flexibility with their external torque
sensor input.

are immediately recognized when connected to the display base
and are available for your specific testing needs in 1 N-m (9 in-lb)
5 N-m (44 in-lb), 10 N-m (88 in-lb) capacities. The multiple-lan­guage FG-7000T’s provide menu programming for easy selection
and set-up of the instrument to your desired requirements. Four
selectable modes of operation include: Track mode for live read­ings, Peak mode for displaying the maximum reading, First Peak
where only the initial peak is recorded once a decrease is sensed
and Preset which initiates user-programmed tolerance alarms for
go/no go testing. The display has two selectable operations, nu­merical view with directional bar graph or graphical view with di­rectional bar graph. In graphical view when alarm tolerances are
set, the process is plotted in relation to the upper and lower limit
graph lines. Combined with the go/no go icons, a simple pass/
fail determination is recognized. These high-tech instruments can
data log a reading at the push of a button for simple data acquisi­tion or be set to continuous data storage. Data can be viewed on
the screen, sent to the optional printer, or loaded to be analyzed
and graphed on the free software program. The 1,000 point mem­ory with definable groups allows for multiple tests to be recorded
and easily separated upon loading. In addition, the comparator
output can be set up for integration of the instrument into a quality
system for repetitive testing such as on a production line. The
FG-7000T’s robust housings are designed to fit perfectly in the
operator’s hand for portable testing. The large back-lit, 180° au­to-reversible display, CW/CCW directional bar graph, combined
with the dual labeled key pad allows for usage of the gauge in
various positions while still being able to easily view and operate.
These various features make the FG-7000T the ideal torque in­strument for various applications such as closing or opening anal­ysis of containers, valves and door hardware, failure or destructive
torque testing, or almost any torque testing requirement involving
incoming quality inspection, finished goods testing to R&D.

Torque sensors with standard chuck adapter

FG-7000T Digital Torque Gauge

FG-7000T with Included

Accessories and Carry Case

Features

• Display operates in numerical or graph modes, both include a directional bar graph

• Graph mode combined with set point tolerances provides instant recognition of process relation to upper and lower limits

• Four Modes of Operation: Peak, First Peak Preset or Track Mode

• Memory with group categorization to easily separate your tests for review and later download

• Free software for viewing, graphing and analyzing data on PC

• Large, Backlit, Auto-Reversible display with various icons of test status aids user during testing

• Programmable High/Low tolerances combined with comparator NPN/PNP output allow usage in quality
control production lines

FG-7000T Series Specifications

Accuracy ± 0.3% F.S.

Selectable Units N-m, N-cm, kgf-cm, lbf-in (Depending on Range)

Overload Capacity 120% of F.S. (LCD flashes beyond 110% of F.S.)

Measurement method Peak, First Peak Preset or Track Mode

Data Sampling Rate 1000 Hz

Display 160*128 dot matrix LCD with LED Backlight

Display Update Rate 10 times/second

Resolution (See page 2 Resolution Table)

Memory 1000 data

Set Point Programmable high and low limits

Battery Indicator Display flashes battery icon when battery is low

Power 3.6VDC 800mAH Ni-MH rechargeable batteries

Battery Life Approximately 16 hours continuous use per full charge

Charger / Adapter Universal USB/BM charger, Input: 110 ~ 240VAC

Temperature Effects <0.054% per °F (0.03% FS per °C)

Outputs USB, Serial Port RS-232, High & Low Limit NPN

Operating Temperature 14 to 104°F (-10 to 40°C)

Storage Relative Humidity 20 to 80%

Housing Aluminum

Storage Temperature -4 to 122°F (-20 to 50°C)

Oper. Relative Humidity 5 to 95%

Dimensions 5.7 x 2.9 x 1.4” (145 x 73 x 35.5 mm)

Product Weight 3.7 (1.7 kg)

Package Weight 5.5 (2.5 kg)

Warranty 1 year

Certifications CE

Included Accessories Key Chuck, AC Adapter/Charger, USB cable, calibration cert.

Ordering Details

Model N-m N-cm kgf-cm lbf-ft lbf-in Interface Type

FG-7000T-1

FG-7000T-2

FG-7000T-3

Capacity 1 100 10 - 8.9 Drill

Resolution 0.001 0.1 0.01 - 0.005

Capacity 5 500 50 3.68 44.3

Resolution 0.001 0.1 0.01 0.001 0.01

Capacity 10 1000 100 7.38 88.5 Drill Chuck

Resolution 0.01 1 0.1 0.001 0.01

Chuck

1-10 mm

(0.034 to 0.39 in)

2-13 mm

(0.079 to 0.512 in)

Operation Mode

CW/CCW

Direction

Bar Graph

Sensor

Time Indication

Connection Status