SHIMPO DT-5RL-3 User Manual

Panel Mount
Tachometer

Model DT-5RL-1, 2, 3

*

Features

• Range (0 - 99999)

• Accuracy 0.01% F.S.

• Input frequency 5KHz max.

• Measures RPM or linear speed (scaleable)

Instruction Manual

Name of Parts

To access keys, remove front bezel with flathead screwdriver
in slot at bottom of bezel and twist.

• Linear Speed y/min, m/min or ft/min (selectable)

• Number of ppr (1 - 9999)

• Decimal point selectable

• Display 5 digit LED .56" (14.22mm) high

• Sampling Time 0.1 ~ 99.9 sec. (selectable)

Wiring Detail

DIGITAL TACHOMETER

DT-5RL-

NIDEC-SHIMPO
AMERICA CORPORATION
ITASCA, IL [phone]

1 2 3 4 5 6 7 8

SIG OV

S/N

No. SIGNAL INPUT
1 TTL LEVEL
2 NPN O.C.
3 1-60VAC

+12V
50mA

230 VAC

115 VAC

Symbol Detail

• "dP" (decimal point selection)

• "diS-t" (display "function" selection)

• "r-t" (RPM)

• "L-t" (linear-speed)

•

"unit" (display unit)

• "nn" (M/min)

• "Ft" (Ft/min)

• "Y" (Y/min)

•

"PPr" number of pulses per revolution

•

"LS-t" sampling time (0.1 ~ 99.9 seconds)

•

"Aug" select according to how fast the observed
speed changes. Set anywhere between 1and 99.

Set diameter of feeding roller through the three

rotary switches.

OperationOperation

Operation

OperationOperation

Turn Power-ON

Display

Push

dp — Press increment key

Push

diS-t — Press increment key

Push

Unit — Press shift

Push

PPr — Press shift key

Push

LS-t — Press shift key

key — Press shift and increment keys simultaneously for at least 3 sec.

Now the decimal point can be selected.

key — Press key. Now you can select RPM or linear speed.

key — If "L-t" is selected. Now "units" can be chosen.

and increment keys and select "M/min", "Ft/min" or "Y/min".

key — Now you are in the PPr field.

and increment key and select the number of PPr anywhere from 1 to 9999.

key — You are in the minimum RPM/Linear rate field. (minimum speed)

and increment key and select cut-off sampling time

anywhere from 0.1 to 99.9 sec. Factory setting is 3 sec.

and set the decimal point.

and select "r-t" or "L-t".

Push

Aug — Press shift key

Push

Input Connection DiagramInput Connection Diagram

Input Connection Diagram

Input Connection DiagramInput Connection Diagram

key — You are now in the speed stability field.

depending how fast speed changes.

key — Press shift and increment keys (simultaneously) momentarily and start measuring

or push

key and start cycle all over again.

and increment key and set value between 1 and 99

SHIMPO IN STRUMENTSSHIMPO IN STRUMENTS

SHIMPO IN STRUMENTS

SHIMPO IN STRUMENTSSHIMPO IN STRUMENTS