Shimpo DT-365 Data Sheet

High-Intensity, Battery Powered LED Strobo­scopes.

boscopes are velocity analyzing and measuring devices that are
ideal for machinery process inspection.
are capable of flashing their LED lights in a synchronous frequen­cy to the operating machinery, creating the illusion of viewing
slowed or frozen images. Utilizing this phenomenon of slowing or
stopping the motion with the adjusted flash rate of its LED lights,
machine parts and processes may be inspected for defects, aid­ing in preventative maintenance programs. This LED technology
extends operation due to the low energy requirement of the light
diodes compared with xenon lit stroboscopes. Proper operation
is assured as concern of light failure during usage, common with
xenon bulbs, is eliminated. The light output (Lux) of the LED’s is
far brighter than xenon powered stroboscopes with the DT-365
outshining all comparable stroboscopes on the market from its
array of 18 LED’s.

The operation panel is a vibrant red LED display that is ideal for
viewing in dark locations. The simple to use keypad plus rate ad­justment dial aids in making quick changes of the flash rate to co­incide with changes in the speed of your process. The dial allows
fine-tune altering of the flash rate while the x2/÷2 keys enable
large spanning over the entire flash range.

The DT-365 has the added feature of modifying the flash dura­tion or on time which aids in picture clarity often necessary in
printing processes. The phase shift function is ideal for rotating
equipment where the user needs to change the focus on different
blades, gears, or section of the machinery. These stroboscopes
are also capable of being synchronized with an input signal. To
complete the system, the DT-365 has a power output to supply an
input sensor if desired. The robust aluminum housing is NEMA-4X
(IP65) protected allowing usage in harsh plant environments. The
DT-365’s array of 18 LED’s allows continuous operation from 2 to
5 hours depending on user settings. Typical applications for the
DT-365 are to determine speeds, inspect rotors, meshing gears,
motors, textile equipment, printing production lines, conveyors,
industrial fans, pump operation, vibration equipment diagnostics
and many more.

The DT-365 High-Intensity, Battery Powered LED Stro-

The DT-365 Stroboscopes

DT-365 LED Portable Stroboscopes

Features

• Extraordinary durability with extruded aluminum, NEMA 4X (IP65)
construction

• Bright LED display and simple controls aid in user operation

• Long Lasting, quick-charge NiMH rechargeable battery provides
exceptional usage reliability

• Phase shift (in degrees of delay time) enables visual analysis of
rotating or reciprocating objects through all points of motion/time/
angle

• Flash controller dial permits accurate adjustments to the flash
rate

• LED technology greatly extends operation life and eliminates
need to replace burned out bulbs

• Capable of being synchronized with input signal from sensor or
controller

Easy Operation Control

LED
Display

Dial

Input
Signal

Battery Power
Connection

LOAD

SIG

MODE

X2/÷2

UNIT

Store and retrieve 5 flash setting values

Change Operation from INTERNAL to EXTERNAL
flash control

Select between Flash Mode or Flash Duration
and phase shift settings

Multiply or divide Flash Rate Setting by X2 or ÷2

Select between degrees or ms in phase shift mode,
select between degrees and μs in flash duration mode

DT-365 Specifications

Range FPM (RPM) 60-120,000; From Input Signal 40-35,000

Accuracy ±0.02% of reading

Lux Rating (Approx.)

Lamp Lifetime Typ. 50,000 hours. Varies depending on usage.

Display 6 digit Red LED

Resolution Internal Mode 1 FPM. External Mode 0.1 FPM

Flash Duration 0.1 to 3.6° (0.14 μsec to 400 μsec)

Phase Shift 0 to 999 msec; 0 to 359°

Power Requirement 100 to 230 VAC to included AC power adapter

Battery NiMH battery requires approximate 2.5 hour recharge time

Battery Life Approx. 2 hrs. with flash duration set to 3.6° & 5 hrs. with duration set to 1.0°

Synchronization
Input Signal

Input Signal Range FPM
(RPM)

Input Signal Flash
Delay FPM (RPM)

Input Signal 12V pulse input

Power Supply Output DC12V 40mA for sensor input

Temperature Limits 32 to 95°F (0 to 35°C)

Humidity Limits 35 to 85% RH

Protection Class NEMA 4X (IP65)

Product Weight 4.6 lbs (2.1 kg)

Package Weight 6 lbs (2.72 kg)

Approvals RoHs

Warranty 2 year

Included Accessories AC power adapter, Input signal connector, flash-light style attachable handle

6000 FPM & 3.6° (100 μs): Distance 8˝ (20 cm) 18,400 lx with 10˝ (250 mm) irradiation dia.,
Distance 20˝ (50 cm) 6200 lx with 13.5˝ (350 mm) irradiation dia.
1500 FPM & 3.6° (400 μs): Distance 8˝ (20 cm) 15,000 lx with 10˝ (250 mm) irradiation dia.,
Distance 20˝ (50 cm) 6000 lx with 13.5˝ (350 mm) irradiation dia.

H level: 2.5 - 12V; L level: 0 - 0.4V

40 - 35,000

60-10,000

Ordering Details

DT-365 High Intensity Portable LED Stroboscope with Rechargeable Battery

SAS-360 Flexible swing arm for DT-361, DT-365, DT-365E LED Stroboscopes

SAS-360BASE SAS-DT360 Mounting base

CABLE-361-10FT Daisy chain syncing cable for DT-361 and DT-365 stroboscopes with Connectors, 10 ft length

NIST-STROBE-IN NIST traceable certificate of calibration for stroboscopes

DISTRIBUTED BY: