Shimpo DT-107A-S12, DT-105A-12CBL, DT-107A-12KMW, DT-107A, DT-107A-12CBL Data Sheet
...
The Series DT-100A Tachometer with microprocessor technology has heralded a superior
standard in tachometer accuracy and capabilities for measuring and recording speeds of rotational, linear and surface plus total length.
fering unprecedented confidence, the DT-100A battery-operated
tachometers feature the same rugged, high quality components
that have made them the benchmark in the industry. These userfriendly, value-packed units feature memory storage; quick adjustment units knob; length functions; retrieval of last, maximum
and minimum values; plus each unit comes standard with a free
N.I.S.T. certificate. Units are available with an LCD or vibrant red
LED display.
Incorporating the precise technology and user-friendly functions as the DT-100A, the DT-100A-S12 provides an exceptional accuracy in measuring speed and length via its 12”
wheel. The larger wheel rotates more slowly than a standard 6”
wheel, enabling reliable and safe registration of high speeds.
Of-
DT-100A Contact Tachometers
Employing a non-slip rubber contact surface, the FPM-12-CBL
adds safety and accuracy while measuring speeds on elevator
governor cables, wire & cable reels, extruded tubing and many
other applications.
DT-105A
The FPM-12-KMW, 12” circumference aluminum wheel with
knurled edge, aids in usage where wheel slippage may occur
and is ideally suited for hot surface temperature applications.
Features
• Outstanding accuracy allows usage in the strictest applications
• Exceptionally rugged die-cast aluminum housing enables usage in the harshest conditions
• Wide field selection of units in both instantaneous rate as well as totalized length satisfies a multitude
of user requirements
• 10 memory capacity allows quick retrieval of stored data plus additional last, max. & min. values
• Long-life battery (25-40 hrs. continuous use) eliminates concerns of being down during testing
• Rear threaded inserts provides option to mount to stand or other device
• Available display options of either LCD or vibrant, bright red LED
DT-107A
• CE Mark combined with free N.I.S.T. certificate affirms instrument quality
Shown with
Included 6”
Cir. Wheel
Optional
12” Cir. Wheel
DT-100A Specifications
Display Range 0.10 - 25,000RPM with floating decimal
±0.06 rpm: 0.10 - 999.9 rpm; ±0.6
Accuracy
Display
Measuring Units
Memory System
Detection Optical coupler, 60 pulses/rev.
Update Time 1 second (typical)
Over Range Indicator Flashing numerals
Power Requirement
Operating Temperature 32º - 113ºF (0º - 45ºC)
Construction Die-cast aluminum housing
Product Weight 0.9 lb (400 g)
Package Weight Approx. 2 lb (.91 kg)
Approvals CE
Dimensions
Warranty 2-Year
Included Accessories
Options
rpm: 1,000.0 - 9,999.9 rpm; ±0.006% of
reading ±1 digit (±2 rpm max.) 25,000
rpm
DT-105A: 5 digit 0.47” (12 mm) high
LED; DT-107A: 5 digit 0.4” (10 mm)
high LED
Revolution: RPH, RPM; Feet: FPH,
FPM; Miles: MPH; Yards: YPH, YPM;
Inches: IPM; Meters: mPH, mPM;
Length: m, cm, inches, feet, yards; Total
Revolutions: REV
13 readings are stored in memory and
retained for 5 minutes (last, max., min.,
and 10 extra measurements)
2 AA 1.5V batteries (Life: Approx.
DT-105A: 65 hrs.; DT-107A: 40 hrs.)
7.2” L x 2.4” W x 1.8”H
(182.5 mm x 60 mm x 46 mm)
2 cone adapters, funnel adapter, 3½”
extension shaft, carrying case, NIST
certificate, master wheel (6” cir.)
-S12 Option: Same as DT-100A except
6” circumference wheel replaced with
12” circumference contact wheel
Ordering Details
DT-105A
DT-107A
* To order optional 12” circumference wheel models, add
the below extension codes to models
-S12 for 12 inch circumference measuring wheel
-12-CBL for 12 inch circumference cable wheel
-12-KMW
LCD Contact Tachometer with included 6” contact wheel. Includes NIST
certificate.
LED Contact Tachometer with laser sensor and
contact adapter for use with included 6” contact
wheel. Includes NIST certificate.
for 12 inch circumference aluminum knurled
wheel
Accessories
CONE 1/2 inch cone adapter
CONE-3/4 3/4 inch cone adapter
CONE-1-1/4 1-1/4 inch cone adapter
DT-CARRY100 Carrying case for handheld tachometers
EXT-SHAFT
FPM-12 12 inch circumference measuring wheel
FPM-6 6 inch circumference measuring wheel
FPM-12-CBL 12 inch circumference cable wheel
FPM-12-KMW
FPM-6-GV
FUNNEL 1/2 inch funnel adapter
NIST-TACH NIST traceable certificate with data
3.5 inch extension shaft for handheld
tachometers
12 inch circumference aluminum knurled
measuring wheel
6 inch circumference grooved measuring
wheel
Included Accessories
(2) Cone
Tips
1/2” Funnel
Tip
Extension
Shaft (3 1/2”)
FPM-6
6” cir. wheel
Special Wheel Options
Carrying
Case
12” Cable Wheel 12” Aluminum Wheel
Loading...