Shimano SM-PD65 Service Instructions

SI-PD65A-000-00

General Safety Information

Installation

WARNING

•

Be sure to attach reflectors to the bicycle when riding at night. Do not
continue riding the bicycle if the reflectors are dirty or damaged,
otherwise it becomes more difficult for oncoming vehicles to see you.

•

If you have any questions concerning your pedals, contact a professional
dealer.

•

Read these Technical Service Instructions carefully, and keep them in a
safe place for later reference.

– To avoid serious injuries:

NOTE:

Products are not guaranteed against natural wear and deterioration from
normal use and aging.

SI-PD65A-000

SM-PD65

Reflector

Technical Service Instructions

Position the reflector on the pedal as shown in the illustration.
Secure the reflector with the fixing bolt and plate provided.

* The illustration shows how to install the reflector on the right pedal.

Tightening torque:
2,0 N·m {17 in. lbs.}

Phillips screwdriver (No. 2)

Phillips screwdriver (No. 2) is a
registered trademark of Phillips Screw
Company, Inc.

Fixing bolt

Plate

Pedal

Note:

•

SM-PD65 is for use with PD-5700-C/PD-R550 only.

•

The reflector can be installed on either a left or right pedal.

One Holland, Irvine, California 92618, U.S.A. Phone: [phone]

Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: [phone]

Reflector

* Service Instructions in further languages are available at :

http://si.shimano.com

Please note: specifications are subject to change for improvement without notice. (English)

3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

© Nov. 2012 by Shimano Inc. HTR