Page 1
• Do not clean the bicycle in a high-pressure car wash. If water gets into any of
the components, operating problems or rusting may result.
• Handle the products carefully, and avoid subjecting them to any strong
shocks.
• Contact the place of purchase for updates of the product software. The most
up-to-date information is available on the Shimano website.
• Do not use thinners or similar substances to clean the products. Such
substances may damage the surfaces.
• If gear shifting operations cannot be carried out smoothly, clean the derailleur
and lubricate all moving parts.
• If the chain keeps skipping, ask the place of purchase to replace the
chainrings, sprockets and/or the chain.
• If there is a large amount of play in the pulleys which causes a lot of
annoying noise, ask the place of purchase to replace the pulleys.
• You should periodically wash the sprockets in a neutral detergent and then
lubricate them again. In addition, cleaning the chain with neutral detergent
and lubricating it can be a effective way of extending the useful life of the
sprockets and the chain.
• Be careful not to let water get into the terminal.
• Parts are not guaranteed against natural wear or deterioration resulting from
normal use.
• For maximum performance we highly recommend Shimano lubricants and
maintenance products.
UM-5XW0A-001-00
User's manual
• Maintenance interval depends on the usage and riding circumstances.
Clean regularly the chain with an appropriate chaincleaner. Never use
alkali based or acid based solvents such as rust cleaners. If those
solvent be used chain might break and cause serious injury.
• Check that the tension of the chain is correct and that the chain is not
damaged. If the tension is too weak or the chain is damaged,
the chain should be replaced. If this is not done, the chain may break and
cause serious injury.
• After reading the user's manual carefully, keep it in a safe place for later
reference.
Note
• The components are designed to be fully waterproofed to withstand wet
weather riding conditions; however, do not deliberately place them into water.
WARNING
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Jun. 2011 by Shimano Inc. XBC IZM Printed in Japan.
Before riding the bicycle, check the following items. If any problems are found
with the following items, contact the place of purchase or a bicycle dealer.
• Is gear shifting carried out smoothly?
• Do the links have large amounts of play in them?
• Do the pulleys have large amounts of play in them?
• Are the derailleurs making any abnormal noises?
• Is the chain stretched?
• Is there any noticeable damage to the chain?
Important Safety Information
Regular inspections before riding the bicycle
Names of parts
Pulleys
Terminal
Links
* Rotate the front chainwheel while restoring operation after the protection
function has been activated.
If the bicycle receives a strong impact, the protection function operates and the
connection between the motor and the link is momentarily severed so that the
rear derailleur will no longer operate. This is done in order to protect the
system at times such as if the bicycle falls over. If this happens, press the rear
derailleur adjustment button on junction (A) of the SM-EW67-A-E for 5 seconds
or more. This will restore the connection between the motor and the link and
clear the protection function for the rear derailleur. If the connection is not
restored, push/pull the cage sideways or move it forward and backward by
hand. Operate the shifting switches to check that the connection has been
restored.
When the red LED on junction (A) is illuminated, the rear derailleur cannot shift
gears.
Press the rear derailleur adjustment button until the red LED turns off.
About the protection function
Junction (A)
Illuminates (red)
Approx. 5-second period
Rear derailleur
adjustment button
Button held down Illuminates (red) Flashes (red)
Protection clear
operation
Protection
cleared
RD-6770
Rear derailleur
* User's manuals in other languages are available at :
http://techdocs.shimano.com/techdocs/index.jsp
DANGER
Contact the place of purchase or a bicycle dealer for information on installation
and adjustment of the products which are not found in the user's manual.
A dealer's manual for professional and experienced bicycle mechanics is
available on our website (http://techdocs.shimano.com/techdocs/index.jsp).
For safety, be sure to read this user's manual
thoroughly before use, and follow them for correct use.
Failure to follow the instructions will result in death or serious injury.
WARNING
Failure to follow the instructions could result in death or serious injury.
CAUTION
Failure to follow the instructions could cause personal injury or physical
damage to equipment and surroundings.
INTRODUCTION
The following instructions must be observed at all times in order to prevent
personal injury and physical damage to equipment and surroundings.
The instructions are classified according to the degree of danger
or damage which may occur if the product is used incorrectly.
Loading...