Shimano HB-7600-A, HB-7600-F, HB-7710-F Service Instructions

Page 1
HB-7600-F / HB-7710-F
36 H / 32 H / 28 H / 24 H (Option)
100 mm
Model No.
No. of spoke holes
Overlock nut dimensions
General Safety Information
Obtain and read the service instructions carefully prior to installing the parts. Loose, worn or damaged parts may cause the bicycle to fall over and serious injury may occur as a result. We strongly recommend only using genuine Shimano replacement parts.
• Read these Technical Service Instructions carefully, and keep them in a safe place for later reference.
Note
• If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.
• Do not apply any lubricant to the inside of the hub, otherwise the grease will come out.
• Parts are not guaranteed against natural wear or deterioration resulting from normal use.
• For maximum performance we highly recommend Shimano lubricants and maintenance products.
WARNING
Truck hub (Front)
Specifications
* Service Instructions in further languages are available at :
http://techdocs.shimano.com
Please note: specifications are subject to change for improvement without notice. (English) © Sep. 2009 by Shimano Inc. XBC SZK Printed in Japan.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Installation to the frame
Technical Service Instructions
SI-23T0A-001
HB-7600-F HB-7710-F
Track Hub (Front)
SI-23T0A-001-00
Secure the fronthub to the frame with the nut.
Lock nut double-locking
tightening torque:
15 - 25 N·m {131 - 218 in. lbs.}
Lock nut
Loading...