Shimano FD-M660, FD-M665, FD-M770, FD-M970 Service Instructions

Page 1
<Connecting and securing the inner cable>
Use an 8 mm spanner to tighten the wire fixing bolt.
General Safety Information
WARNING
• Be careful not to let the cuffs of your clothes get caught in the chain while riding, otherwise you may fall off the bicycle.
• Read these Technical Service Instructions carefully, and keep them in a safe place for later reference.
Note
• If gear shifting operations do not feel smooth, wash the derailleur and lubricate all moving parts.
• If the amount of looseness in the links is so great that adjustment is not possible, you should replace the derailleur.
• Shimano does not provide the bottom bracket mount fixing bolts.
• For smooth operation, use the specified outer casing and the bottom bracket cable guide.
• Parts are not guaranteed against natural wear or deterioration resulting from normal use.
• For maximum performance we highly recommend Shimano lubricants and maintenance products.
• For any questions regarding methods of installation, adjustment, maintenance or operation, please contact a professional bicycle dealer.
Technical Service Instructions SI-0072A-001
FD-M970-E / M770-E / M660-E / M665-E
BB mount type front derailleur
(models without BB plate)
Installation of the front derailleur
Install the front derailleur as shown in the illustration.
Please note: specifications are subject to change for improvement without notice. (English) © May 2009 by Shimano Inc. XBC SZK Printed in Japan.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
< Normal type > < Top route type >
8 mm spanner
Note:
Pass the cable through as shown in the illustration.
Wire fixing bolt
Be sure to read the service instructions for the front derailleur and the Front Drive System in conjunction with these service instructions.
Tightening torque :
5 - 7 N·m {44 - 60 in. lbs.}
Example: When using an Allen key
Bottom bracket mount
Bracket
Bottom bracket mount fixing bolt Note: Shimano does not provide the bottom bracket
mount fixing bolts.
SI-0072A-001-00
Loading...