Regular inspections before riding the bicycle .............................................. 6
Names of parts................................................................................................ 7
2
Page 3
IMPORTANT NOTICE
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on installation, adjustment, and replacement of
the products which are not found in the user's manual. A dealer's manual for professional and experienced
bicycle mechanics is available on our website ( https://si.shimano.com ).
For safety, be sure to read this “user's manual” thoroughly before use, follow it for correct use, and store it so
that it can be referenced at any time.
The following instructions must be observed at all times in order to prevent personal injury and physical damage
to equipment and surroundings. The instructions are classified according to the degree of danger or damage
which may occur if the product is used incorrectly.
DANGER
WARNING
CAUTION
Failure to follow the instructions will result in death or serious injury.
Failure to follow the instructions could result in death or serious injury.
Failure to follow the instructions could cause personal injury or physical damage to
equipment and surroundings.
3
Page 4
Important safety information
Important safety information
Do not disassemble or modify the product. This may cause the product to not operate correctly, and you
may suddenly fall and be seriously injured.
Downhill bicycle riding and freeriding are inherently dangerous activities. It is strongly recommended that
riders wear protective head and body gear and perform thorough safety checks of their bicycles before
riding. Please remember that you are riding at your own risk and that you have to consider your
experience and your skills very carefully. There is a risk of being involved in an accident that can result in
a serious injury or even death.
Check that there are no cracks in the cranks before riding the bicycle. If there are any cracks, the crank
may break and you may fall off the bicycle.
Be careful not to let the hemming of your clothes get caught in the chain while riding. Otherwise, you
may fall off the bicycle.
Be careful not to touch the teeth of chainrings. There is a danger of injury.
4
Page 5
Notice
Notice
Use a neutral detergent to clean the crank and the bottom bracket. Using alkaline or acidic detergents may
cause discoloration.
If pedaling performance does not feel normal, perform an inspection again.
Do not wash the surrounding area of the bottom bracket with a high-pressure washer.
The gears should be periodically washed with a neutral detergent. In addition, cleaning the chain with neutral
detergent and lubricating it can be an effective way of extending the life of the gears and the chain.
The cuffs of your clothing may get dirty from the chain while riding.
Products are not guaranteed against natural wear and deterioration from normal use and aging.
For maximum performance we highly recommend Shimano lubricants and maintenance products.
5
Page 6
Regular inspections before riding the bicycle
Regular inspections before riding
the bicycle
Before riding the bicycle, check the following items. If any problems are found, consult your place of purchase or
a distributor.
Are there any cracks in the cranks?
Is the pedaling performance smooth?
Does the drivetrain perform gear shifting smoothly?
Is there looseness in the component parts?
Are the components securely installed to the frame/handlebar?
Do any abnormal noises occur while riding?
6
Page 7
Crank
Gear
Bearing section (bottom bracket)
Fastening section
Fastening
section
Crank
Names of parts
Names of parts
7
Page 8
One Holl and, Irvine, California 92 618, U.S.A. Ph one: +1-949-9 51-5003
High Tec h Campus 92, 5656 AG Eindho ven, The Neth erlands Phone : +31-402-6122 22
3-77 Oim atsu-cho, Sak ai-ku, Sakai City, Osaka 59 0-8577, Japan