Page 1
UM-0JZ0A-001
SHIMANO Total Electric Power System
User's Manual
for Drop Handlebar Bicycles
This user's manual is for SHIMANO STEPS drop handlebar bicycles.
It describes configurations for drop handlebar type bicycles, how to operate the dual control lever,
and other information.
Refer to the user's manual for your series for details on how to handle the battery, and on settings
for assist mode and the cycle computer.
User's manuals for each series can be seen at the following link:
http://si.shimano.com
Page 2
CONTENTS
English
IMPORTANT NOTICE
Important safety information
To ensure safety
User's Manuals
User's Manual for Drop Handlebar Bicycles (this document)
SHIMANO STEPS user's manuals for each series
Assist Mode
Quick guide
.................................................................................................6
.................................................................................................7
Names of parts
Operation
.................................................................................................11
Basic operation
......................................................................................2
.........................................................................2
...........................................................................................2
.............................................................................................6
.........................................................................6
........................................................................................... 10
..................................................................................................................11
........................................................6
1
Page 3
IMPORTANT NOTICE
•
Contact the place of purchase or a bicycle dealer for
information on installation and adjustment of the products
which are not found in the user's manual. A dealer's
manual for professional and experienced bicycle mechanics
is available on our website (http://si.shimano.com).
•
Do not disassemble or alter this product.
•
Use the product according to local laws and regulations.
•
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by SHIMANO INC. is under license. Other
trademarks and trade names are those of their respective
owners.
For safety, be sure to read this user's
manual thoroughly before use, and
follow it for correct use.
Important safety information
•
Please keep the User’s Manual for future reference.
•
Be sure to observe the following in order to avoid burns
or other injury from fluid leakages, overheating, fire or
explosions.
To ensure safety
DANGER
Handling the battery
•
Do not deform, modify, disassemble or apply solder directly to
the battery. Doing so may cause leakage, overheating,
bursting, or ignition of the battery.
•
Do not leave the battery near sources of heat such as heaters.
Doing so may cause bursting or ignition of the battery.
•
Do not heat the battery or throw it into a fire. Doing so may
cause bursting or ignition of the battery.
•
Do not subject the battery to strong shocks or throw it. If this
is not observed, overheating, bursting, or fire may occur.
•
Do not place the battery into fresh water or sea water, and do
not allow the battery terminals to get wet. Doing so may
cause overheating, bursting, or ignition of the battery.
•
Use the SHIMANO specified charger and observe the specified
charging conditions when charging the specified battery. Not
doing so may cause overheating, bursting, or ignition of the
battery.
WARNING
To ensure safe riding
•
Do not give too much of your attention to the cycle computer
display while riding, otherwise accidents may result.
•
Check that the wheels are securely installed to
the bicycle before commencing riding. If the
wheels are not securely installed, the bicycle may
fall over and cause serious injury.
•
If riding a power-assisted bicycle, make sure that
you are fully familiar with the starting-off
characteristics of the bicycle before riding it on
roads with several vehicle lanes and pedestrian
footpaths. If the bicycle starts off suddenly,
accidents may result.
•
Check that the bicycle lights illuminate before
riding at night.
Using the product safely
•
Be sure to remove the battery and charging cable before
wiring or attaching parts to the bicycle. Otherwise, an
electric shock may result.
•
When charging the battery while it is installed on the
bicycle, do not move the bicycle. The power plug for the
battery charger may come loose and not be fully inserted
into the electrical outlet, resulting in risk of fire.
•
Do not touch the drive unit when it has been
continuously used for a long period of time. The surface
of the drive unit becomes hot and could cause burns.
•
Periodically clean the chain using an appropriate chain
cleaner. The frequency of maintenance will vary
depending on the riding conditions.
•
Do not use alkaline or acidic cleaning agents for
removing rust under any circumstances. If such cleaning
agents are used, they may damage the chain and serious
injury may result.
•
When installing this product, be sure to follow the
instructions given in the user's manual. Furthermore, it is
recommended that you use only genuine SHIMANO parts
at these times. If bolts and nuts are left loosened or the
product is damaged, the bicycle may suddenly fall over
and serious injury may result.
2
Page 4
Handling the battery
•
If any liquid leaking from the battery gets into your eyes,
immediately wash the affected area thoroughly with
clean water such as tap water without rubbing your eyes,
and seek medical advice immediately. If this is not done,
the battery liquid may damage your eyes.
•
Do not recharge the battery in places with high humidity
or outdoors. Doing so may result in electric shock.
•
Do not insert or remove the plug while it is wet. If this is
not observed, electric shocks may result. If there is water
leaking out of the plug, dry it thoroughly before
inserting it.
•
If the battery does not become fully charged after 2
hours of charging, immediately unplug the battery from
the outlet and contact the place of purchase. Doing
otherwise may cause overheating, bursting, or ignition of
the battery. Refer to the battery charger user's manual
for the designated charging time of the battery.
•
Do not use the battery if it has any noticeable scratches
or other external damage. Doing so may cause bursting,
overheating or problems with operation.
•
The operating temperature ranges for the battery are
given below. Do not use the battery in temperatures
outside these ranges. If the battery is used or stored in
temperatures outside these ranges, fire, injury or
problems with operation may occur.
1. During discharge: -10°C - 50°C
2. During charging: 0°C - 40°C
CAUTION
To ensure safe riding
•
Observe the instructions in the user's manual for the
bicycle, in order to ride safely.
Using the product safely
•
Never attempt to modify the system yourself. It may
cause problems with system operation.
•
Periodically check the battery charger and adapter,
particularly the cord, plug, and case, for any damage. If
the charger or adapter is broken, do not use it until it has
been repaired.
•
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
•
Do not allow children to play near the product.
Handling the battery
•
Do not leave the battery in a place exposed to direct
sunlight, inside a vehicle on a hot day, or other hot
places. This may result in battery leakage.
•
If any leaked fluid gets on your skin or clothes, wash it
off immediately with clean water. The leaked fluid may
damage your skin.
•
Store the battery in a safe place out of the reach of
infants and pets.
3
Page 5
NOTICE
Using the product safely
•
If any malfunctions or other problems occur, contact the
place of purchase.
•
Be sure to install caps to any connectors which are not
being used.
•
For installation and adjustment of the product, consult a
dealer.
•
The Product is designed to be fully waterproof to
withstand wet weather riding conditions. However, do
not deliberately place them into water.
•
Do not clean the bicycle in a high-pressure wash. If water
gets into any of the components, operating problems or
rusting may result.
•
Do not turn the bicycle upside down. The cycle computer
or the shifting switch may get damaged.
•
Handle the product carefully, and avoid subjecting it to
any strong shocks.
•
Although the bicycle still functions as a normal bicycle even
when the battery is removed, the light does not turn on if
it is connected to the electric power system. Be aware that
using the bicycle under these conditions will be considered
non-observance of the road traffic laws in Germany.
•
When charging the battery while it is mounted on the
bicycle, be careful of the following:
-
When charging, make sure there is no water on the
charging port or the charger plug.
-
Ensure that the battery is locked into the battery
mount before charging.
-
Do not remove the battery from the battery mount
while charging.
-
Do not ride with the charger mounted.
-
Close the charging port cap when not charging.
-
Stabilize the bicycle to ensure that it does not
collapse during charging.
Handling the battery
•
When you carry a power-assisted bicycle in a car, remove
the battery from the bicycle and place the bicycle on a
stable surface in the car.
•
Before connecting the battery, make sure that there is no
buildup of water or dirt in the connector where the
battery will be connected.
•
The use of a genuine SHIMANO battery is recommended.
If using a battery from another manufacturer, make sure
to carefully read the instruction manual for the battery
before use.
Disposal information for countries outside
the European Union
This symbol is only valid within the
European Union. Follow local regulations
when disposing of used batteries. If you
are not sure, consult the place of purchase
or a bicycle dealer.
Connection and communication with PC
A PC linkage device can be used to connect a PC to the
bicycle (system or components), and E-TUBE PROJECT can be
used to carry out tasks such as customizing single
components or the whole system and updating firmware.
•
PC linkage device: SM-PCE1/SM-PCE02
•
E-TUBE PROJECT: PC application
•
Firmware: software inside each component
Connection and communication with
smartphone or tablet
It is possible to customize single components or the system,
and update firmware, using E-TUBE PROJECT for
smartphones/tablets after connecting the bicycle (system or
components) to a smartphone or tablet via Bluetooth
•
E-TUBE PROJECT: app for smartphones/tablets
•
Firmware: software inside each component
®
LE.
4
Page 6
Cleaning
•
The number found on the battery mount key is necessary
when purchasing spare keys. Keep it in a safe place.
There is a space to enter the key number on the back
cover of this user's manual. Enter the key number for
safekeeping and later reference.
•
Contact the place of purchase for updates of the product
software. The most up-to-date information is available
on the SHIMANO website. For details, refer to the
"Connection and communication with devices." section.
•
Do not use thinner or other solvents to clean any of the
products. As such substances may damage the surfaces.
•
You should periodically wash the chainrings in a neutral
detergent. In addition, cleaning the chain with neutral
detergent and lubricating it can be an effective way of
extending the useful life of the chainrings and the chain.
•
Use a damp cloth, with the water well wrung out, when
cleaning the battery and plastic cover.
•
For any questions regarding handling and maintenance,
contact the place of purchase.
•
Products are not guaranteed against natural wear and
deterioration from normal use and aging.
•
For maximum performance we highly recommend
SHIMANO lubricants and maintenance products.
Assist
•
If the settings are not correct, for instance if the chain
tension is too tight, the proper assist force may not be
obtained. If this happens, contact the place of purchase.
FCC compliance information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
NOTICE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV
technician for help.
Label
•
Some of the important information contained in this
user's manual is also indicated on the battery charger
label.
5
Page 7
User's Manuals
Instructions on how to use SHIMANO STEPS for drop handlebar bicycles are spread across two documents: your "SHIMANO
STEPS user's manual for your series" and the "User's Manual for Drop Handlebar Bicycles" (this document).
Be sure to read this document along with the user's manual for your series.
User's manuals for each series can be seen at the following website, or accessed from the QR code included in "Important
Information on this Product" included with the product:
http://si.shimano.com
*
"QR code" is a registered trademark of DENSO WAVE INCORPORATED.
User's Manual for Drop Handlebar Bicycles (this document)
This describes SHIMANO STEPS configurations for drop handlebar bicycles, how to operate the switches on the dual control
lever, and other information.
SHIMANO STEPS user's manuals for each series
These describe the following topics not included in the User's Manual for Drop Handlebar Bicycles:
-
How to handle the battery
-
Assist mode and cycle computer settings
-
Troubleshooting
Assist Mode
The assist mode can be selected according to each usage scenario.
[HIGH]/[BOOST] [NORM] (normal)/[TRAIL] [ECO]
Sudden ascending slopes Gentle ascending slopes and level ground Long distance riding on level ground
When the battery level is low, this reduces assistance and increases the maximum traveling distance.
[OFF]
• When assist is not required
• When the battery level is unstable
[WALK]
When walking while pushing the E-BIKE
• Walk assist mode may not be able to be used in certain regions.
6
Page 8
Quick guide
1.
Charge the battery.
It is possible to charge the battety even while it is mounted on the bicycle.
Refer to the user's manual for your series for details.
External type
Example : BT-E8010
2
1
3
Light On
Built-in type
Example : BT-E8020
2
1
Lights up
Flashing
Charging
Charging error
Light On
3
7
Page 9
2.
Turn on the power.
To turn off the power, repeat this procedure.
External type
Example : BT-E8010
Built-in type
Example : BT-E8020
NOTICE
When turning the power ON/OFF, do not place your foot on the pedal.
8
Page 10
3.
Select your preferred assist mode.
*
When the power is turned on, assist mode is set to [OFF].
*
The figure shows an example of using the E6100 Series.
Dual control lever (left)
[OFF]
Y
X
*
The Walk assist mode function may not be able to be used in certain regions.
Y
X
[ECO]
[NORM]
[HIGH]
EW-EN100
LED (inward) Assist mode
Button
Lit in light blue
Button
Lit in green
Lit in yellow
Hold Y
Press X
Press Y
OFF
OFF
[WALK]
[OFF]
[ECO]
[NORM]
[HIGH]
[OFF]
4.
Ride the bicycle.
Assist will start when you start pedaling.
CAUTION
Before riding, please check the brake system of your bicycle and how to operate it beforehand.
5.
Turn off the power.
9
Page 11
Names of parts
(H)
(E)
(C)
(D)
(A)
(B)
(G)
(A)
Cycle computer/Junction [A]:
SC-E6100
SC-E7000
EW-EN100
(B)
Dual control lever (assist
switch):
ST-R8070-L
ST-RX815-L
(C)
Drive unit
(D)
External type battery/battery
mount
(E)
Battery charger
(F)
Built-in type battery/battery
mount
*
Refer to the user's manual for
your series for information on
drive units and batteries.
When using electronic gear shifting
(G)
Dual control lever (DI2):
ST-R8070-R
ST-RX815-R
(H)
Rear derailleur (DI2):
RD-R8050
RD-RX815
RD-RX817
10
(F)
Page 12
Operation
Basic operation
This section describes how to use the cycle computer and dual control lever.
•
The functions assigned to switches when riding can be changed from those described here. For details, please contact your
place of purchase or a local bicycle dealer for assistance.
Cycle computer and dual control lever
SC-E6100
Function
button
Function
button
Function
button
SC-E7000
Light button
Power button
Cycle computer (SC-E6100)
At riding: change the travel data display on
the cycle computer.
At setting: switch between the screens, confirm
settings.
Cycle computer (SC-E7000)
At riding: change the travel data display on the cycle computer.
At setting: switch between the screens, confirm settings.
Light
button
Power
button
Function button
Turn the lights ON/OFF.
Turn the power ON/OFF.
11
Page 13
ST-R8070-L
ST-RX815-L
ST-R8070-R
ST-RX815-R
Remote switch Remote switch
X X
Y Y
Dual control lever (left)
(default: for assistance)
At riding: increase assistance.
X
Y
Remote
switch
At setting: move the setting menu cursor,
adjust settings,etc.
At riding: decrease assistance.
At setting: move the setting menu cursor,
adjust settings,etc.
When riding: Switch traveling data displayed on the cycle computer.
X
Y
NOTICE
When the bicycle uses a rear derailleur, be sure to shift gears while pedaling.
Dual control lever (right)
(default: for electronic shifting)
At riding: Shift from a smaller gear to a larger
gear.
At riding: Shift from a larger gear to a smaller
gear.
12
Page 14
Junction [A] (EW-EN100)
EW-EN100 is used instead of cycle computer.
It is attached to the brake outer casing or brake hose and located near the handle bar.
Button
Junction [A]
Press: Change assist mode (each time button is pressed).
Button
•
To change to walk assist mode, a switch unit is required.
•
The button does not recommend operating this unit while riding the bicycle. Please select your preferred assist mode
before riding.
•
The RD Protection Reset function can only be used if the rear derailleur is an electronic gear shifting unit.
Hold (around two seconds): Light turns ON/OFF.
Hold (eight seconds or longer): RD Protection Reset will operate.
Refer to the user's manual for your series for information on cycle computer/junction A operations and settings, error
messages, and troubleshooting.
13
Page 15
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Apr. 2019 by SHIMANO INC. ITP
Loading...