Page 1
UM-2XY0D-000-00
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
User's Manual
Notice
Hub Dynamo
User's manuals in other languages are available at :
https://si.shimano.com
IMPORTANT NOTICE
•Contact the place of purchase or a distributor for information on
installation, adjustment, and replacement of the products which are
not found in the user's manual. A dealer's manual for professional
and experienced bicycle mechanics is available on our website (https://
si.shimano.com).
For safety, be sure to read this “user's manual”
thoroughly before use, follow it for correct use,
and store it so that it can be referenced at any time.
The following instructions must be observed at all times in order to
prevent personal injury and physical damage to equipment and
surroundings. The instructions are classified according to the degree of
danger or damage which may occur if the product is used incorrectly.
DANGER
WARNING
CAUTION
Failure to follow the instructions will result
in death or serious injury.
Failure to follow the instructions could
result in death or serious injury.
Failure to follow the instructions could
cause personal injury or physical damage
to equipment and surroundings.
•Be sure to install the hub dynamo to the front fork so that the side
with the connection terminal is on the right when facing toward the
front of the bicycle. If it is installed on the left side, rotation problems
may occur while riding.
•Check that the hub dynamo connection terminal is securely connected
before using the hub dynamo.
•Make sure to also refer to the brake user's manual.
•Products are not guaranteed against natural wear and deterioration
from normal use and aging.
•For maximum performance we highly recommend SHIMANO
lubricants and maintenance products.
* The 1.5 W hub dynamo is for LED use only.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are
found, consult your place of purchase or a distributor.
•Are the wheels secure?
•Does the light turn on?
•Is abnormal noise emitted from inside the hub?
Names of parts
Connector
cover
Connect
Remove
Cord
Important safety information
WARNING
•Do not disassemble or modify the product. This may cause the product
to not operate correctly, and you may suddenly fall and be seriously
injured.
•Check that the wheels are fastened securely before riding the
bicycle. The wheel may fall off, etc. and lead to serious injury
due to a fall.
•Observe the total weight of the bicycle (bicycle + rider + luggage)
indicated on the hub body. If the total weight of the bicycle is
indicated on the hub body, the power modulator that controls an
excessive braking effect is built in. If the total weight of the bicycle is
heavier than the recommended range, braking may be insufficient; if
lighter, braking will be too effective and the wheel may be locked,
which may cause you to fall off the bicycle. Make sure you fully
understand the performance of the power modulator before use. The
power modulator is not an anti-locking device of the wheel.
•Ensure that head and tail lights can turn on before riding the bicycle.
•Use the E-THRU hub dynamo in combination with the special front
fork/frame and the through axle only. If it is used in combination with
any other front fork/frame or through axle, it may cause the wheel to
become detached from the bicycle during riding and result in serious
bodily injury.
Connection
terminal
Front fork
Hub body
CAUTION
•When riding or rotating the wheels, never touch the connection
terminals of the hub dynamo. Failure to do so may cause an electric
shock.
Please note: specifications are subject to change for improvement without notice. (English)
© Mar. 2021 by SHIMANO INC. ITP
Loading...