Wireless Charging Mouse Pad
manual
The diagram of installation
❶Power supply
❷Connector for power supply
❸Charging area
❹Indicator Light area
❺Product description
First of all ,thanks sincerely for buying this product
For your safety ,please read this manual carefully before using this product
The first:To protect people from harm and property loss,we make a clear
explanation on what you do should obey:
A:Warning!Thereare concerning the possibilities of death and severs
wound:People who use heart-birth -maker should consult your doctor before
you use this product and please leave it at a Distance of 50cm form the place
where you install your heart -birth Maker,the electromagnetic wave have
influence on hard birth-maker’s work.
B:Attention !it may led to heat fire and electric shock DO NOT put it into water
or any other liquid
1) Donot put it into water or any other liquid,Do not make it wet
2) Do not pull the adapter out with wet hands ensure The safety and integrity
of the adapter
3) Do not let the dust or other thing accumulate on the product and the AC
adapter
4) Do not use the product outside the temperature -20 to 40℃℃
5) Do not charge in place where the sunshine directly or With high
temperature
6) Do not use this product in places that are easy to fall,so as not to break
7) Do not lay the magnetic card,magnetic record media and precise machine
too close to the protect
8) Do not decompose and remold
9) Do not lay the anything between the non-connect charging pad and the
charging machine
10) Do not surpass the rated value when using the plug and other wiring layout
11) Do not your breakage on the AC adapter please make sure you connect
the AC adapter fully and take the AC adapter off the plug when it not use
12) Do not use travel converter
13) Please touch your children ,the let them use
The second :Product advantages
1) The product is of high sensitivity,intelligent recognition ,put a charge ,after
charging automatically enter Standby mode of the product
2) Charge for all Qi compliant product
3) Efficiency can reach more than 70%,less heat
4) In the process of charging can be free to pick up answer The
phone ,freeing discharge or charge
Thethird:Wireless charge’s charging method
1) Please connect the product the AC adapter or USB to thecomputer
socket red light is on enters the standby status
2) Charge the device placed directly in charge of the product label
instructions regional(no direction of attention )blue light red light at the same
time entering the charge Electrical state
need charging equipment ,charging is complete
3) Need charging equipment,charging is completed,the red light is on,take
The fourth:Product features
Product mode:
Main functions:wireless charging transmitter
Standard version:WPC-1.1；
Products applicable :all wireless charging equipment
Accorded with QI standard
Charging type:one--on-one charge corresponding area
The input voltage:DC5V
Launch distance:4 to 6mm;
Conversion efficiency ≥ 70%
Charging methods:induction model
Working frequency:125khz
Accessories /component name :USB cable,wireless
Charging pad :packing box :Adapter (selective)
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment
has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
‐‐
the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for
help.
Loading...