SHI KISB Electronic BTK 722 User Manual
BTK-722
BLUETOOTH® HEADSET
USERS MANUAL
JW_Blue_BT42_Booklet.indd 1JW_Blue_BT42_Booklet.indd 1 6/10/14 2:35 PM6/10/14 2:35 PM
INTRODUCTION
STOP
AND
READ
BEFORE YOU BEGIN TO USE YOUR JUST WIRELESS®
BLUETOOTH® HEADSET, YOU MUST FULLY CHARGE AND PAIR
IT WITH YOUR MOBILE PHONE. PLEASE READ THE ENCLOSED
USERS MANUAL FOR EASY PAIRING INSTRUCTIONS.
SHOULD YOU NEED ASSISTANCE, PLEASE CALL 888-753-6957.
JW_Blue_BT42_Booklet.indd 2-Sec1:1JW_Blue_BT42_Booklet.indd 2-Sec1:1 6/10/14 2:35 PM6/10/14 2:35 PM
Thank you for purchasing the Just Wireless Bluetooth® Headset. We hope you enjoy it. This manual
will get you started and help you to get familiar with the features of your headset. For those individuals
with the Bluetooth® Headset, in addition to all the other features, the unit supports a multipoint function to allow simultaneous connection of the Bluetooth® Headset with 2 mobile phones.
ABOUT YOUR JUST WIRELESS BLUETOOTH HEADSET
Your Just Wireless® Bluetooth® Headset lets you do the following functions, provided your mobile
phone can support it:
•
Making a call
•
Ending a call
•
Answering calls
•
Adjusting Volume
•
Voice Command Dialing
•
Redialing last number
•
Placing a call on hold
•
Call Waiting
•
Rejecting a call
1
FEATURE DIAGRAM
Vol
u
Low
Mai
n
Volume
3
Higher
Volume
Lower
Main Button
Microphone
Charging
Port
4
2
Adjustable
Ear Hook
Earphone
6
7
1
5
1 LED Indicator Light/Main Button
a) Blue mode indicates active/standby.
•
2 Consecutive Flashes: Your Bluetooth®
Headset is not connected to your mobile
phone.
•
1 Consecutive Flash: Your Bluetooth®
Headset is connected to your mobile phone.
b) Red mode indicates battery level.
•
Flashing Red - Indicates low battery level.
•
Solid Red - Indicates your Bluetooth®
Headset is being charged.
•
Solid Blue - The battery is fully charged.
Volume Lower -
2
Volume Higher +
3
Charging Port
4
5
5 Microphone
6
6 Adjustable Ear Hook
7
Earphone
c) Blue/Red Flashing Mode
•
2 3
JW_Blue_BT42_Booklet.indd Sec1:2-Sec1:3JW_Blue_BT42_Booklet.indd Sec1:2-Sec1:3 6/10/14 2:35 PM6/10/14 2:35 PM
Your Bluetooth® Headset is in pairing
mode
GETTING STARTED
CHARGING YOUR HEADSET
Your Just Wireless® Bluetooth® Headset comes with a built in rechargeable battery, and must be
fully charged before using. Use the supplied USB Cable to charge your headset by plugging it into the
TURNING THE HEADSET ON AND OFF
ON Mode: Press and hold down the Main Button for 3 seconds. Your headset will beep and the blue
LED light will fl ash 5 times. Now your headset is on.
charging jack shown below.
OFF Mode: Press and hold down the Main Button for 4 seconds. You headset will beep and the red
LED light will fl ash 3 times. Now your headset is off.
•
The red LED light will fl ash
when you have a low battery
level. It is suggested to
charge the headset at this time.
•
The red light will illuminate solid red during charging and will turn solid blue
Standby Mode: To save battery power, your headset will automatically change to standby mode
when not in use. The blue LED light will fl ash every 4 seconds. The headset will automatically change
back to ON mode, when a call is incoming, or when the Main Button is pressed.
when fully charged. It will take approximately 1-2 hours to charge.
•
Your headset cannot be used while charging.
4 5
JW_Blue_BT42_Booklet.indd Sec1:4-Sec1:5JW_Blue_BT42_Booklet.indd Sec1:4-Sec1:5 6/10/14 2:35 PM6/10/14 2:35 PM
Loading...