BTK-721 Bluetooth Headset User Manual
Button 2 Button 1 Button 3
BASIC OPERATIONS
Power on/off the headset
1. Power on
Press Button 1 for 3 seconds, the indicator of the headset will flash blue for 1 second, followed by a voice
“Power on”.
2. Power off
Press Button 1 for 2 seconds, the indicator of the headset will flash red for 1 second, followed by a voice
“Power off”.
3. When the indicator flashes red in standby mode, it indicates that the headset is in low battery
and a voice “Battery Low” will come out, please charge the headset. During charge, the
indicator of the headset will become red; and when the battery is full, the indicator of the
headset will become blue.
Pairing
The Bluetooth headset will not work until it is paired and connected with phones.
1. Power off the headset (see “Power off” section), and enable Bluetooth in “Setting” in your phone.
2. Press Button 1 for 5 seconds, the indicator light will flash blue and red alternately, followed by a voice
“Pairing”.
3. Follow the guide of your phone to search Bluetooth. Generally, you need to go to ‘Setup’, 'Connect', or
‘Bluetooth’ menu on your mobile phone, and select the option to search Bluetooth devices.
4. Bluetooth headset “BTK-721” will be found, and you will be inquired if you want to pair with it. Permit it
by click the “Yes” or “OK” key.
1
5. Enter p assword or PIN code “0000” (4 zeros), and click the “Y es” or “OK” key. When the indic ator
flashes blue twice, the headset is connected with mobile phone successfully.
IMPORTANT: If the headset cannot be paired within 90 seconds while it is in pairing mode, it is failed to
pair. Please re-do Step 1 to Step 5 to pair the headset again.
Connect the Headset with Two Mobile Phones (Multipoint connecting)
BTK-721 supports Multipoint connection: to connect with two mobile phones simultaneously.
1. Follow the steps in “Pairing” section to connect the headset with the first mobile phone.
2. Power off the headset.
3. Re-do the steps in “Pairing” section to connect with the second mobile phone.
4. Go into the first mobile phone’s menu, Bluetooth section, and click “BTK-721” to connect with the first
mobile phone.
Set a call
1. Dial number on the keypad or select the contact name from the contact list of your mobile phone.
2. Press phone’s “send/call” key.
Voice Dialing
Please ensure your mobile phone supports voice dialing, and the voice tag assigned for this
feature.
1. Press Button 1 once.
2. When a voice “Voice Dial” comes out, say the name of the person you want to call.
3. Shortly press Button 1 once to stop voice dialing.
Note: For different mobile phones, the actual operation may be different.
Ending a call
Shortly press Button 1 once to end call.
Answering a call
If the headset connected with one mobile phone:
Shortly press button 1 once to answer a call.
If the headset connected with two mobile phones:
1. If you are making a call and another call comes from the other mobile phone press button 1 once
to answer the call from the second phone and keep the call in the first phone.
2. Press button 1 for 2 seconds to reject the call from the other phone and keep the call from the firs t
phone.
3. If you set calls from 2 phones at the same time press button 1 twice to transfer the calls from 2
phones.
2