shi DajieKejiYouxianGongsi WE300 User Manual
Log in to wireless.repeater
FCC ID: 2AREL-WE300
User Manual
Getting started
1.Plug into the outlet
router)
and waiting 40 seconds.
(near the
WPS
Connecon Status
Device
Internet
RESET
WIRELESS-XXXX
2.Join the wifi SSID:
mobile phone ; and the password
.
is null
Press this buon and the WPS buon of end device within
2 minutes, then connect immediately.
No connecon：
Need to setup or move
closer to the router
by
3. Scan the below QR code or enter http://
wireless.repeater at address bar , then
input username: admin and password:
admin, you will get into the setup page.
Weak recepon：
Signal strength below than 25%
(move closer to the router)
ON
Device is working well
Device can not be connected
with internet
Good recepon:
Signal strength 25% to 75%
(Right distance)
OFF Blink
Power-on self-test or
device error
Device is connected
with internet
Excellent recepon:
Signal strength 75%-100%
( move away to the router)
WPS in process
Press this buon for 5 seconds to restore to factory seng
4.Select the language and
click "Enter".
5. After entering the setting page, just select
your home wifi router and input your home
wifi router password (change ssid and
password of extender if need), then click
"Next".
802.11n 300M Wireless Extender/AP
Please select the router which you want to connect
and input the password(if need),the click “Next”.
H3C_AB1395
TEST-2.4G
WiFi883
OURLINK-5484(2.4G)
T800
WIRELESS-9596
OURLINK-MESH-2.4
Pantum-AP-F48D90
TP-LINK_37C2
ChinaNet-iTpE
ChinaNet-vuBR
ChinaNet-VRfT
xy2
Settings WLAN
WLAN
WIRELESS-001 B
CHOOSE A NETWORK...
ChinaNet-zglx
OFFICE-2.4G
OFFICE-5G
i
i
i
i
6.Please click the button at bottom to
finish the setup, the repeater will
restart. Now you can join it to enjoy
the internet.
.REPEATER
WIRELESS
admin
admin
Cancel Log In
Frequently asked and answers
How do enter setup page again?
You can enter the setting page at anytime.
(In case you can't enter, have other
methods: Re-plug the device and power it 、
on, use your mobile phone to connect SSID
(WIRELESS-XXXX) Then input http://wireless.
repeater to enter into setup page, input
usename:admin and password:admin.
How do go back to factory setting?
Please hold the Reset Button for 5 seconds to
reset the device.
Password of router:
Name of Extender:
Password of Extender:
12345678
WIRELESS-EB05
Next
Loading...