Sherbourn Technologies C-12 Brochure

In an age of inconspicuous consumption,
where more and more electronic installa­tions are being concealed in cabinets or
cupboards, heat has become a major factor.
Heat is the enemy of all electronic compo­nents and is a major contributor to poor
reliability. Housed in a rack-mountable
chassis, Sherbourn’s innovative C12 cooling
unit is designed to permit multiple configu­rations for pointing the cool air emanating
from its three thermally governed fans into

Home Theater and Custom Solutions

any direction including the outside—you
make the decision based upon your needs.
The C12 has a low voltage trigger, a built-in
thermal and/or pigtail sensor, a minimum
temperature activation switch and a synch
switch in case you want two fans.

No other fan system offers the flexibility
of Sherbourn’s, with its ability to move over
one hundred cubic feet of air per minute in
a whisper-quiet and efficient manner.

Side view

Front view

Rear view

An innovative, efficient and uniquely configurable
cooling fan unit: Model C12.

CUSTOM SOLUTIONS

FEATURES AND SPECIFICATIONS: C-12 Cooling Unit

• Housed in a 2" high rack-mountable chassis

• Contains three whisper-quiet 4.75 inch fans

• Features an embedded thermal sensor

• Front panel has a master power switch and blue LED lights

• Front panel contains an air filter to filter incoming air should a front intake be operational

• Rear panel has a 12 volt trigger, a two-position switch for setting the minimum starting
temperature switch, a synch switch should a particular installation require two fans, an
input to accept the pig tail thermal sensor and two exhaust ports

• Minimum temperature start switch can be set to either 95 or 194 degrees Fahrenheit

• Includes a magnetic pig tail thermal sensor for use when one wants to measure the tempera­ture at the “hot spot” of the installation. When used, this sensor will over-ride the one
embedded in the chassis

• Can be mechanically configured to allow the air flow to be front exhaust, rear exhaust, top
exhaust with a front entry or top exhaust with a bottom entry

• Contains two exhaust ports should the hot air need to be directed to the outside

• Optional exhaust hose kit for use in directing the air to the outside

SPECIFICATIONS:

Carton weight 9 lbs/4.1 kilograms
Configuration Three 3.75" thermal sensing fans that can be configured to

intake or exhaust

12 volt trigger Selectable Thermal Switch:The three fans can activate at

two different ambient room temperatures
Synch switch Allows two units to operate at similar speeds
Pig-Tail remote temp. sensor Governs fan speed from the “hot spot” of the installation
Optional exhaust hose kit Allows hot air to be drawn from the installation to an

alternative location
Chassis Dimensions 15.7" W x 8.75" D x 2.25" H

400mm W x 222mm D x 57mmH
Rack mount panel dimensions 19"W x 3.75"H (attaches to front panel of fan chassis)

483mm W x 95mm H

SHERBOURN TECHNOLOGIES INC.
19/3A Sterling Road • North Billerica, MA 01862 USA

Tel: [phone] Fax: [phone]
www. Sherbourn.com

In accordance with our policy of continual improvement, we reserve the right to change the specifications without notice.
Printed in U.S.A.

SPECIFICATIONS